Upgrade to enjoy this feature!
Vital MX fantasy is free to play, but Premium users receive great benefits. Premium benefits include:
- View and download rider stats
- Pick trends
- Create a private league
- And more!
Only $10 for all 2026 SX, MX, and SMX series.
The KTM/Husky/Gasgas has an advantage in build quality that really shows off road. The clutch lasts forever, including the basket (it's steel instead of aluminum), chain, sprockets, brakes, etc all seem to hold up better. They also have a much deeper off road offering so you are more likely to find what you want. The Japanese have all but given up on off road.. Their only disadvantage is the suspension -- it's not great and doesn't hold up to really hard, fast riding for me. I smoked the shock in less than 15hrs. I swapped out for a Trax shock and KYB A kit forks and no more troubles there. For what you describe I think you will be just fine on the stock suspension.
Fwiw I'm at a hundred hours in my 300 (off road A class) and other than suspension and tires I haven't replaced a thing beyond regular maintenance (oil changes and air filters). Stock chain, sprockets, brake pads, etc all still good.
Did you swap out the new xc spring forks for Kyb internals or did your bike come with air?
Curious if people are swapping out of the stock spring cartridges on the new xc.
Mine was air. I haven't ridden a spring XC bike yet. If they have the same single side damper I would personally toss them, but I don't now if that's the case. I don't mind the air spring, it's WP's lousy little single sided damper that ruins it for me personally. Most folks will be fine through. I ride a wide variety of off road terrain fast, and love whoops and jumps but still need to be able to absorb rocky stuff (mostly CO and UT), so I'm pretty hard on and picky about suspension. If I slow down and ride with B class friends the stock stuff is fine--forks work ok and shock doesn't overheat. If I ride at my limit, especially on the Western slope which is sorta desert with lots of whoops and higher speed rocks, I'll overheat a stock shock and the stock forks drive me nuts.
What entails “smoking” a shock? Just in need of service or actual failure?
The Shop
Luxon 4-Post Bar Mounts
$189.95 - $239.95
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
It got so hot it lost much of the damping. Once it cooled down it was a little better but still way off. I didn't have a ir gun with me on the ride but it was hot enough to burn my finger. I tossed it into a bin and installed a traxx shock. I can run the same route on the traxx shock and it stays much cooler and damping is reasonably consistent. I would guess that a service and maybe new shims would bring the stock shock back, but then I'd probably overheat it again on the next ride so I didn't try. Note I ride with a bunch of guys on KTMs and they don't have the issues I do with shocks. They don't hammer whoops like I do either! I love whoops and will get on top of big desert whoops and stay there for miles
The new spring forks are twin damper like a KYB or Showa. The AER damper is larger diameter than the spring forks, but I think the unequal loading due to only having a damper in one side is part of the reason people don't like air forks. There isn't really a solution to have symmetrical air/damper cartridges either as the damper will get hot so you can't really mix it with an air spring unless you like your spring rate going up while you ride.
Cool, I bet those spring forks will be a big improvement.
I have KYB PSF1 A Kit forks. I've never looked inside them but my impression is that they have air springs and dampers inside each leg. Whatever is going on in their works awesome! They gobble up rocks with more plushness than the AERs and still have way more hold up. They also settle in turns better so the bike corners much better.
Don’t buy into the “Japanese bike parts are cheaper.” An oem chain for my kx450 is nearly 2x it was for my 22ktm. Funny thing is, they are both DID chains….
Kx450 plastics are crazy. Their bolts and gaskets I’ve gotten so far are just mind blowing. Get whatever bike you want. They all last forever but don’t you dare think the ktm parts are more expensive.
Why would you buy a stock Kawi chain? They are garbage. Ever hear of Acerbis or Spec Bolt?
It’s no secret that the KTM piston band setup may be prone to generating more heat. Plenty of suspension shops are killing it on bladder conversions, you are definitely not the first to experience that.
Who buys any OEM chain?
Comparing Austrian vs Japanese doesn’t make a whole lot of sense as there’s a huge difference in quality between the 4 Japanese brands in the first place.
Um, did you even bother to look up the chain on a 24 450x?
Bet you didn’t lol
I’ve had more small maintenance issues with this KTM than I’ve had with any other bike I’ve owned (mostly Yamaha 2 strokes). I have a KTM 250f with only 25 hours in it and the issues I’ve had are:
Leaky valve cover gasket, timing chain tensioner replacement, sheared rear spoke nipple and spoke, leaking fork seals, rear tire spinning on the rim, rear sprocket bolts keep coming loose, and my rear brake disc is now somehow bent.
Nothing major, but very annoying to deal with all within 25 hours. Can’t say these parts have been any more expensive than Jap bike parts. I take pretty good care of my bikes too with regular maintenance and torquing bolts to spec and checking them often. Other than these minor things, the bikes a blast to ride. Just wish there wasn’t as many frequent little issues.
I race KTMs off road (currently on a 22 250xcf) and honestly all I do is keep up with basic maintenance. I think I’m around 150 hrs on the original clutch and topend. I had the valves and compression checked at 80 hrs and where fine.. i was thinking about getting 25 but there is really is no reason as the bike still feels extremely tight and is not showing wear. I was a lifetime Kawi guy but I have say this Austrian stuff is pretty damn solid.
Pit Row
Post a reply to: KTM vs. “Big 4” bikes: Maintenance $$