Bar mount cones

keagan
Posts
6
Joined
11/26/2023
Location
Diamond creek, VIC, AU

Hey fellas,

I want to change the rubber cones in the triple clamp, over to the alloy ones, because I’m shit and always drop the bike and twist bars. 

I’ve got a 2023 kx250 and the only replacements I can find online are a cone the whole way round. Whereas the factory ones have a flattened out section, making them almost a d shape. 
Dunno if there’s something I’m in aware of, or if anyone else has a solution to this (other than not dropping the bike so often)

Cheers!9

|
Luxon MX
Posts
1402
Joined
11/6/2017
Location
San Diego, CA, USA
10/12/2024 7:49am

These will solve your issues without losing the rubber mounting:

https://www.luxonmx.com/product-luxon-4post-rubber-mounted-bar-mounts-kawasaki-cone.html

Or for a less expensive option, these will work too, but only available for the front mounting holes:

https://www.luxonmx.com/product-luxon-kawasaki-bar-mounts.html 

1
luigis
Posts
74
Joined
6/19/2024
Location
Djee, NL
10/14/2024 1:00am

+1 on the one piece mounts, they will mostly eliminate bar twisting. Many other OEM still run rubber cones and a solid mount

keagan
Posts
6
Joined
11/26/2023
Location
Diamond creek, VIC, AU
10/14/2024 11:50am

Do either of you have any knowledge of how the alloy cones work, say the Zeta ones as an example, work in the kawi triple clamp? The website I’m buying from is saying they fit my bike, but they don’t have the d shape. Wondering whether the cone itself is narrower, making it skip the d shape. Thanks heaps for your help guys, just looking for a cheaper alternative atm. Cheers

Luxon MX
Posts
1402
Joined
11/6/2017
Location
San Diego, CA, USA
10/14/2024 3:43pm
keagan wrote:
Do either of you have any knowledge of how the alloy cones work, say the Zeta ones as an example, work in the kawi triple clamp...

Do either of you have any knowledge of how the alloy cones work, say the Zeta ones as an example, work in the kawi triple clamp? The website I’m buying from is saying they fit my bike, but they don’t have the d shape. Wondering whether the cone itself is narrower, making it skip the d shape. Thanks heaps for your help guys, just looking for a cheaper alternative atm. Cheers

You're going to need the d-shaped cones. It's possible the website is using a generic photo of a cone (all other brands are round) and they'll ship you the right one. 

The Shop

KW62
Posts
89
Joined
9/8/2017
Location
Ferndale, MI, USA
10/18/2024 7:39am
Luxon MX wrote:
These will solve your issues without losing the rubber mounting:https://www.luxonmx.com/product-luxon-4post-rubber-mounted-bar-mounts-kawasaki-cone.htmlOr for a less expensive option, these will work too, but only available for the...

These will solve your issues without losing the rubber mounting:

https://www.luxonmx.com/product-luxon-4post-rubber-mounted-bar-mounts-kawasaki-cone.html

Or for a less expensive option, these will work too, but only available for the front mounting holes:

https://www.luxonmx.com/product-luxon-kawasaki-bar-mounts.html 

Billy's mounts fixed my bar twisting problems on my CRF. I was to the point where I could twist the bars without even going down.

Billy has another post floating around about using anti-seize on your triple clamp bolts to get a more predictable clamping force. You will need to lower torque a bit though and this applies more for the wheel twisting within the clamps vs the bars twisting in the mounts. 

1

Post a reply to: Bar mount cones

The Latest