Hey guys !
I decided to go riding this week-end and after one session, the starter was not working anymore couldn't hear anything. Went home, washed the bike and then blow some air to try to get water out of electronic.
So the problem i'm facing now is i only hear a little sound near the relay, don't even hear the pomp. I checked the battery and i can see it's good, about 13v on voltmeter. I saw a lot of people talking about changing the relay fuse. The operation sounds easy but i've never touch too much electronic. I've seen some people say it's good to unplug the battery before doing anything.
Could you guys explain me how to do this or if you think the issue might be somewhere else. Also i don't know where to order this part (Europe) to have it fast, i saw on amazon they are pretty standard one but yeah maybe it's not the fuse.
Sounds like bad connection….
Bad battery. Measure voltage across battery when pushing button. If it drops lower than 10v, I would try a new battery.
Unplug the killswitch, same thing happened to mine, switch ended up being bad/corroded.
Hey guys ! It was not a battery issue, i did clean the killswitch but it looked good.I checked near the relay and there are 2 red fuses of 10A. It was really dirty so i cleaned everything with contact spray and then i checked and one of the fuse was dead, so i replaced it and knows it's good.
Really happy because this fix was the cheapest i have ever made 2$ for the fuse and that's it.
Thanks
Post a reply to: CRF 250 2023 Won't start