2011 YZ 125?

Lightning78
Posts
6353
Joined
12/12/2007
Location
Huntington Beach, CA, USA
4/23/2010 9:15pm
Oh BTW: I was at Malcom Smith motorsports last weekend trying to pickup an air filte rthey didn't have for my 01RM and they hads 2 brand new 06 RM250's yes brand new for $3,990!........ As a disclaimer I don't work for them but if you are looking for a brand new 250 2 stroke and want to save some coin over getting a 7k 2010 KTM or 6K 2010 YZ 250 the 06 RM is one of the best bikes I have ever ridden ......shoot if i was working I'd buy one just to have another because the are that dam good.....This is just my opinon of the bike but I have ridden every other MFG's 250 2 stroke, 450 and 250f and for me none impressed me more than the 06RM250!
4/23/2010 9:16pm Edited Date/Time 4/23/2010 9:18pm
4/23/2010 9:18pm Edited Date/Time 4/23/2010 9:18pm
41NDT
Posts
855
Joined
3/19/2007
Location
AU
4/23/2010 11:07pm
Some creative photoshoping like we have seen on here before?

The Shop

supr_fly_tnt
Posts
374
Joined
4/1/2008
Location
Brent World, VT, USA
4/23/2010 11:15pm
i was wondering if it was the 09 or 10 with new plastic. but the engine looks a lot for forward to me than 09's and 10. it may be the angle of the pic. but if it is actually moved forward, then there were some engine upgrades in that bad boy!!! Smile
Big E
Posts
460
Joined
12/8/2007
Location
Orange, CA, USA
4/23/2010 11:19pm
If Yamaha busts out new two smokers with that plastic and EFI its over! THEY WOULD SELL TONS!

How insane would an EFI two smoker be!!!!???
Pat327
Posts
686
Joined
2/18/2008
Location
USA
4/23/2010 11:29pm Edited Date/Time 4/23/2010 11:46pm
Pat327 wrote:
It's the same frame, but with the new plastic. If it's just a homemade plastic conversion, whoever made it should sell it as a kit. It's...
It's the same frame, but with the new plastic. If it's just a homemade plastic conversion, whoever made it should sell it as a kit. It's very clean looking.
I doubt it's a homemade conversion look at the gas tank.....all YZF's are not twin spar or "bi-lateral" frames so the tank would not work......also it...
I doubt it's a homemade conversion look at the gas tank.....all YZF's are not twin spar or "bi-lateral" frames so the tank would not work......also it would be A LOT of work just to get the tank made in order to fit the rest of the plastics....I hope Yamaha does release a new updated line of smokers they would sell the sh!t out of them without a doubt. Also if you poke around there is a link to a yz250 in a 2010 YZ250f frame lookin sweeeeeeeeeeeeet!!!
Brakkeman says it was built by VD Laar Racing in the Netherlands. So it's not exactly homemade, but Yamaha doesn't have anything to do with it either. They have some black and white plastic YZ fuel tanks for sale on their site, so I'd bet that they made this one as well. They did a really nice job with it. Hopefully they'll sell it as a kit.

That YZ250 in the YZ250F frame you saw on TSM is a photoshop render that I made a while back. It's the second one on that page. You can still see the hot start lever if you look closely. I also did the CR125 that's posted on the same page.
Pat327
Posts
686
Joined
2/18/2008
Location
USA
4/23/2010 11:34pm
i was wondering if it was the 09 or 10 with new plastic. but the engine looks a lot for forward to me than 09's and...
i was wondering if it was the 09 or 10 with new plastic. but the engine looks a lot for forward to me than 09's and 10. it may be the angle of the pic. but if it is actually moved forward, then there were some engine upgrades in that bad boy!!! Smile
It's a completely stock '08, '09, or '10 YZ125 with an extremely well-done bodywork conversion.

Post a reply to: 2011 YZ 125?

The Latest