Float pin loose?

styles740
Profile picture for user styles740
Posts
5
Joined
10/29/2023
Location
Utica, NY, USA
styles740

noticed the pin for my 99 cr250 is loose and if the carb goes on its side the pin drops right out. It also kinda wiggles a bit allowing the float it self to have side to side play. Is it normal or should the float pin be a tight fit?

|
soggy
Profile picture for user soggy
Posts
8858
Joined
12/3/2018
Location
USA
soggy 4/6/2024 4:57pm
4/6/2024 4:57pm

I’ve never had one that was snug fit. 

3
seth505
Profile picture for user seth505
Posts
10214
Joined
4/1/2008
Location
SD, CA, USA
seth505 4/6/2024 6:40pm
4/6/2024 6:40pm

Ya, they are all rather loose. The carb float bowl keeps it in place when bolted on.

7
TDC
Profile picture for user TDC
Posts
398
Joined
8/4/2023
Location
HTown, TX, USA
TDC 4/20/2024 9:35pm
4/20/2024 9:35pm
styles740 wrote:
noticed the pin for my 99 cr250 is loose and if the carb goes on its side the pin drops right out. It also kinda wiggles...

noticed the pin for my 99 cr250 is loose and if the carb goes on its side the pin drops right out. It also kinda wiggles a bit allowing the float it self to have side to side play. Is it normal or should the float pin be a tight fit?

OK, I had one of the post holes get worn. Mid RPM vibration caused the float to shift. Result was the float needle allowed fuel to over fill the bowl. Killed the YAT. Power stuttered like the CDI or stator was cutting out. 

Post a reply to: Float pin loose?