Posts
2
Joined
7/13/2019
Location
NO
Hi
Anybody who knows the tread size for the different shocks, preferably showa and kyb. Want to try and make them myself.
I have for the WP and Øhlins shocks already.
Sorry, i don’t know the thread diameter/pitch but are you making Bleed cups like these ? DRC makes the ones in the pic but i’d be interested in how you DIY.
Hi
I have seen these, and they look nice, but i would like some fittings to use with my vakuum filler.
There are kit's you can buy for a couple houndred bucks, but with shipping and import taxes to Norway it will be kinda expensive.
If you're in a pinch, you can take a stock bladder cap, drill it out, put a hollow threaded tube or NPT fitting through the middle and a flat dish larger then the ID of the reservoir to keep it from sucking into the body and cutting the sealing ring off the bottom of a bladder to keep it all sealed. Lainer suspension makes a vacuum bleeder and their adapter set is similar to that way instead of using the adjuster hole. If you have access to a decent lathe, you could just copy the Lainer design but they also have a division in Italy, which should make it import tax free for you and shipping should be fairly reasonable if you just buy their kit.
Post a reply to: Shock bleeding adapters