Husqvarna fx 350 2023 hour counting problem

VicenteSousa
Posts
3
Joined
3/5/2024
Location
Cascais,Lisboa PT

hey guys.

I recently bought a brand new 2023 Husqvarna FX 350, and unfortunately I have been having some electrical problems.

The bike runs fine, has power, but is constantly counting hours sitting in the garage. I thought it could be the relay, it was replaced but the same problem continued.

The bike has around 20 hours in the dirt, but the hour meter is already at 80 hours. It has already gained close to 60 hours sitting in the garage.

 

Has anyone ever had a problem like this? any tips

|
dansfx
Posts
18
Joined
8/18/2023
Location
GREENVILLE, NC US
3/5/2024 7:08pm

No my ‘23 KTM has experienced that issue,  but it sounds like something is preventing the computer from going to sleep. Try disconnecting the start/stop switch and map switch to see if that helps. 

Rawly
Posts
529
Joined
9/12/2019
Location
Simi Valley, CA US
3/6/2024 5:03pm

If there is anyway to get into the ECU to read the hours , I’d take take that thing back  before you fix it. Could affect your resale ? 

VicenteSousa
Posts
3
Joined
3/5/2024
Location
Cascais,Lisboa PT
3/8/2024 2:11pm
Rawly wrote:
If there is anyway to get into the ECU to read the hours , I’d take take that thing back  before you fix it. Could affect...

If there is anyway to get into the ECU to read the hours , I’d take take that thing back  before you fix it. Could affect your resale ? 

Yes i have checked at the local dealership here in Portugal and its countig hours in the ECU also...but they dont take responsability for the problem. I ordered the bike from an oficial dealership in Germany

1
VicenteSousa
Posts
3
Joined
3/5/2024
Location
Cascais,Lisboa PT
3/8/2024 2:12pm
dansfx wrote:
No my ‘23 KTM has experienced that issue,  but it sounds like something is preventing the computer from going to sleep. Try disconnecting the start/stop switch...

No my ‘23 KTM has experienced that issue,  but it sounds like something is preventing the computer from going to sleep. Try disconnecting the start/stop switch and map switch to see if that helps. 

Yes i Will check it thanks 

Post a reply to: Husqvarna fx 350 2023 hour counting problem

The Latest