Front Vented Number Plate

AnchorTapeCo. 5/1/2023 6:06pm
5/1/2023 6:06pm

Chris crushes it on his plates, we all seem to have a different style of doing them. Price wise I think we are all around the same price. (Haven’t looked at anyone’s prices to be honest) with me doing Anchor full time and not being a graphics company like Chris with Dare Decals. I have to have the people send me their graphic and front plate. That way the fonts are the same, colors are the same. You might be seeing some more bigger names and teams running them come outdoors. 

2
AnchorTapeCo. 5/1/2023 6:11pm
5/1/2023 6:11pm
McG194 wrote:
With modern liquid cooled four strokes a vented plate is just a silly fashion accessory.  With that said, they are so cool, and I think I...

With modern liquid cooled four strokes a vented plate is just a silly fashion accessory. 

With that said, they are so cool, and I think I need one.   Laughing

JordanFeigenbaum wrote:
In fairness, mine is a two stroke   

In fairness, mine is a two stroke Wink

suzuki bar x full 0

 

Like that tape brother 

JordanFeigenbaum 5/1/2023 7:08pm
5/1/2023 7:08pm
McG194 wrote:
With modern liquid cooled four strokes a vented plate is just a silly fashion accessory.  With that said, they are so cool, and I think I...

With modern liquid cooled four strokes a vented plate is just a silly fashion accessory. 

With that said, they are so cool, and I think I need one.   Laughing

JordanFeigenbaum wrote:
In fairness, mine is a two stroke   

In fairness, mine is a two stroke Wink

suzuki bar x full 0

 

AnchorTapeCo. wrote:

Like that tape brother 

Only the best! Didn't know you were doing the plates as well, otherwise would've reached out. Next time!  

The Shop

See All »
Pop Shmoke
Profile picture for user Pop Shmoke
Posts
1787
Joined
6/17/2020
Location
Boston, MA US
Pop Shmoke 5/9/2023 12:20am
5/9/2023 12:20am Edited Date/Time 5/9/2023 12:22am
js256 wrote:
 

5AB51700-A8B5-4475-81E8-3E1BF033B1FE

 

You can see here how gas gas actually notches the front plate on the bottoms of each side from the factory to make sure none of the plate is in the way of the radiator at all. Even with the bars turned all the way to the side there is a wide open path to the radiator. If the bike had one of the old school square front plates it would be covering the top of the radiator here. Its simple yet genius!

threefiddyone
Profile picture for user threefiddyone
Posts
74
Joined
12/16/2014
Location
Baton Rouge, LA US
threefiddyone 8/1/2023 7:27am
8/1/2023 7:27am
johnk408 wrote:
I made mine for $3. I bought black gutter guard at lowes. Used Tinsnips to cut the guard and just used a heated razor to cut...

79405401-2292-418D-B59E-0D862F37CD7D.jpeg?VersionId=KQ3CtOqj.h BbXICfVidI made mine for $3. I bought black gutter guard at lowes. Used Tinsnips to cut the guard and just used a heated razor to cut the plate out. For first time effort it wasn't horrible. Using a cycra plate had some different challenges and how the ktm brake line runs down the back. I think I saw some of these companies were charging like $150 or something ridiculous, not including the plate! I did paint the rivets on the numbers white since this picture.

 

Did you cut the plate and then put the graphics on?  If so, how?  Do you think that the heated knife would mess up the graphics if you cut it with the graphics already on the plastic?  I want to do this but my graphics are already on my plastic.  

johnk408
Profile picture for user johnk408
Posts
1069
Joined
1/20/2022
Location
Ft Mitchell, KY US
johnk408 8/1/2023 11:01am
8/1/2023 11:01am
threefiddyone wrote:
Did you cut the plate and then put the graphics on?  If so, how?  Do you think that the heated knife would mess up the graphics...

Did you cut the plate and then put the graphics on?  If so, how?  Do you think that the heated knife would mess up the graphics if you cut it with the graphics already on the plastic?  I want to do this but my graphics are already on my plastic.  

I’ve done three of my own, all with the graphics already installed. It did not melt the graphics. Not saying it couldn’t, but mine did not. I just hear my knife, not the plastics/graphics themselves.

Electro21 11/20/2023 9:28pm
11/20/2023 9:28pm

The guy at Anchor Tape Company is cool and does a great job!  He texted me a picture of mine he just finished up.

Anchor Tape Co front number plate 1

8

Pit Row

See All »

Post a reply to: Front Vented Number Plate