Cr125 pro circuit

Badman250f

Will a 05-07 pro circuit pipe fit 02-04 need to know if anyone has done this 

|
profeshenal125 3/12/2023 10:18pm
3/12/2023 10:18pm

I installed a 04 pc pipe on a 06 cr125.  It had massive snap off idle Very quick but only pulled to 9k & stopped quick & would not rev out. The pipe fit but there’s no way to short shift as quick as the pipe signed off on a track.  03, 04 share the same pipe. But there radically different engines. 

1
Badman250f 3/12/2023 10:23pm
3/12/2023 10:23pm
profeshenal125 wrote:
I installed a 04 pc pipe on a 06 cr125.  It had massive snap off idle Very quick but only pulled to 9k & stopped quick...

I installed a 04 pc pipe on a 06 cr125.  It had massive snap off idle Very quick but only pulled to 9k & stopped quick & would not rev out. The pipe fit but there’s no way to short shift as quick as the pipe signed off on a track.  03, 04 share the same pipe. But there radically different engines. 

Ok then so I know the motors are different....but your saying all the pipes are the same 02-07 so what it is I need to find out is will the 05-07 pipe fit and bolt up to a 02-04 cheers mate hope u can help

Tumic
Profile picture for user Tumic
Posts
2834
Joined
11/27/2012
Location
Sundsvall, SE
Tumic 3/14/2023 10:08am
3/14/2023 10:08am
Badman250f wrote:
Ok then so I know the motors are different....but your saying all the pipes are the same 02-07 so what it is I need to find...

Ok then so I know the motors are different....but your saying all the pipes are the same 02-07 so what it is I need to find out is will the 05-07 pipe fit and bolt up to a 02-04 cheers mate hope u can help

They bolt up.

1
Badman250f 3/14/2023 10:11am
3/14/2023 10:11am
Badman250f wrote:
Ok then so I know the motors are different....but your saying all the pipes are the same 02-07 so what it is I need to find...

Ok then so I know the motors are different....but your saying all the pipes are the same 02-07 so what it is I need to find out is will the 05-07 pipe fit and bolt up to a 02-04 cheers mate hope u can help

Tumic wrote:

They bolt up.

How do you know 

Post a reply to: Cr125 pro circuit