1986/87/88 CR front wheel fitment??

deccr250
Profile picture for user deccr250
Posts
449
Joined
2/25/2018
Location
GB
deccr250

Hi guys,

pretty simple one but can’t find a definitive answer..will a 1986 or 88 front wheel fit straight on a 1987 CR250/500 front end without changing bearings and spacers etc? 
If not, what will it involve?

cheers Smile

|
andrew kaos 2/7/2023 3:55am
2/7/2023 3:55am

44601-KA3-830ZA HUB,*NH105* (MAT BLACK) is the oem part number for the hub and they list as fitting 1985-1987 cr 125 cr 250 and cr 500 buddy, i always write notes on cross over years so i can go back on them in the futre as i sell a few used parts, always double check but i have the following for honda wheels, i havent put anything on the hardware ie spacers bearings etc

Rear Wheels are the same fitment from 1987-01 CR 500, 1987-99 CR 250, and 1987-99 CR 125,
but rim width is 1.85 wide on 125.1989-01 rear wheels had 32 spokes, 87-88 had 36. 
Front wheels will work 1984-1994, 95 up had bigger axle.

2
deccr250
Profile picture for user deccr250
Posts
449
Joined
2/25/2018
Location
GB
deccr250 2/7/2023 1:23pm
2/7/2023 1:23pm
andrew kaos wrote:
44601-KA3-830ZA HUB,*NH105* (MAT BLACK) is the oem part number for the hub and they list as fitting 1985-1987 cr 125 cr 250 and cr 500 buddy...

44601-KA3-830ZA HUB,*NH105* (MAT BLACK) is the oem part number for the hub and they list as fitting 1985-1987 cr 125 cr 250 and cr 500 buddy, i always write notes on cross over years so i can go back on them in the futre as i sell a few used parts, always double check but i have the following for honda wheels, i havent put anything on the hardware ie spacers bearings etc

Rear Wheels are the same fitment from 1987-01 CR 500, 1987-99 CR 250, and 1987-99 CR 125,
but rim width is 1.85 wide on 125.1989-01 rear wheels had 32 spokes, 87-88 had 36. 
Front wheels will work 1984-1994, 95 up had bigger axle.

Cheers for the info man that’s really helpful. Im hoping an 85/86 front wheel will bolt right up to the 87 forks without swapping bearings and spacers etc 

Post a reply to: 1986/87/88 CR front wheel fitment??