Did Husqvarna fix the Crank issue for 2023 tc 125?

spinyard
Profile picture for user spinyard
Posts
67
Joined
3/3/2022
Location
San Diego, CA, USA
spinyard
I know there was a dealer patch of updating the cdi with a lower rev limiter to mask the crank issues, did that get resolved for 2023?
2
3
|
ML512
Profile picture for user ML512
Posts
17024
Joined
12/28/2008
Location
Wildomar, CA, USA
Fantasy
1319th
ML512 10/31/2022 10:15pm
10/31/2022 10:15pm
spinyard wrote:
I know there was a dealer patch of updating the cdi with a lower rev limiter to mask the crank issues, did that get resolved for...
I know there was a dealer patch of updating the cdi with a lower rev limiter to mask the crank issues, did that get resolved for 2023?
Check the part number and see if it updated again.
1
mikie44
Profile picture for user mikie44
Posts
47
Joined
12/20/2017
Location
Houston, TX, USA
mikie44 11/1/2022 6:01am
11/1/2022 6:01am
spinyard wrote:
I know there was a dealer patch of updating the cdi with a lower rev limiter to mask the crank issues, did that get resolved for...
I know there was a dealer patch of updating the cdi with a lower rev limiter to mask the crank issues, did that get resolved for 2023?
ML512 wrote:
Check the part number and see if it updated again.
2023 TC/SX models don't show up on parts sites yet
1
Motofinne
Profile picture for user Motofinne
Posts
11555
Joined
1/4/2014
Location
FI
Motofinne 11/1/2022 7:27am
11/1/2022 7:27am
spinyard wrote:
I know there was a dealer patch of updating the cdi with a lower rev limiter to mask the crank issues, did that get resolved for...
I know there was a dealer patch of updating the cdi with a lower rev limiter to mask the crank issues, did that get resolved for 2023?
ML512 wrote:
Check the part number and see if it updated again.
mikie44 wrote:
2023 TC/SX models don't show up on parts sites yet
https://sparepartsfinder.ktm.com/

2023 crankshaft has a new part number.
1

The Shop

See All »
Skerby
Profile picture for user Skerby
Posts
1282
Joined
4/9/2013
Location
Mayes County, OK, USA
Skerby 11/1/2022 7:37am
11/1/2022 7:37am
Would the crank just fly apart at low rpm?
1
LungButter
Profile picture for user LungButter
Posts
8684
Joined
1/9/2016
Location
Yellow Pine, ID, USA
LungButter 11/1/2022 7:56am
11/1/2022 7:56am
Skerby wrote:
Would the crank just fly apart at low rpm?
High RPM if I understood correctly. The 'band aid' fix was a new CDI that didn't let the bike Rev quite as high.

I have 2 buddies with these bikes, one went with the Husqvarna recall fix, another went with a Vortex instead. Neither have had issues, both are A level off-road guys so riding pretty hard.
1

Post a reply to: Did Husqvarna fix the Crank issue for 2023 tc 125?