KX 125 jetting

HEADY86
Profile picture for user HEADY86
Posts
67
Joined
12/27/2012
Location
AU
HEADY86
I’d love to know the jetting specs of anyone with a late model 2000 - 2008 KX125 and be sure to list mods on your steed and elevation. Would be much appreciated
|
philepe747 9/3/2022 4:39pm
9/3/2022 4:39pm
Pro circuit has a jetting recommendations on their website. It shows stock vs their setup. I installed a JD jetting in my 03 Kx125 but it will likely be a long time before I’m able to ride it, so I have no input about it yet.
HEADY86
Profile picture for user HEADY86
Posts
67
Joined
12/27/2012
Location
AU
HEADY86 9/5/2022 9:03pm
9/5/2022 9:03pm
philepe747 wrote:
Pro circuit has a jetting recommendations on their website. It shows stock vs their setup. I installed a JD jetting in my 03 Kx125 but it...
Pro circuit has a jetting recommendations on their website. It shows stock vs their setup. I installed a JD jetting in my 03 Kx125 but it will likely be a long time before I’m able to ride it, so I have no input about it yet.
Cool I’ll check it out thanks
dunndetailedit 9/23/2022 12:50pm
9/23/2022 12:50pm
2001 kx125 mikuni tmx36
700ft elevation/South Texas
28:1
Main:380
Pilot:47.5
Slide:5.5
Needle:JD Red
Clip: 2nd
Jet NozzleDizzy -4
Also replaced jet block gasket.
Runs great havent fouled a plug and no splooge
dunndetailedit 9/23/2022 12:52pm
9/23/2022 12:52pm
PC Pipe/Buds Carbon Silencer, VForce 3, Rebuilt Crank and Had Cylinder Replated just did first top end after 25 hours.

Post a reply to: KX 125 jetting