2020 yz250f not starting

jcross199
Profile picture for user jcross199
Posts
8
Joined
11/28/2021
Location
Veneta, OR US
jcross199
Hey guys, I have a 2020 yz250f and took it to the track today. It started up fine and after warming up it died as soon as I touched the gas. Bump starting didn’t work and the electric start eventually drained the battery. After going home I charged the battery and when I push the electric start absolutely nothing happens. I’ve checked the plug, as well as the connections to the battery and can’t seem to find the issue. Any ideas?
|
Day30
Profile picture for user Day30
Posts
38
Joined
4/16/2021
Location
Mesa, AZ US
Day30 11/28/2021 9:51pm
11/28/2021 9:51pm
Did you recently open up your engine or do any work to the bike?
jcross199
Profile picture for user jcross199
Posts
8
Joined
11/28/2021
Location
Veneta, OR US
jcross199 11/28/2021 10:38pm
11/28/2021 10:38pm
I haven’t, I just got the bike from a dealership and have put maybe 5 hours on it but since it’s used they won’t help me out with diagnosing the issue
Factor E
Profile picture for user Factor E
Posts
939
Joined
9/22/2011
Location
So Cal, CA US
Factor E 11/29/2021 2:47am
11/29/2021 2:47am
Pull tank and check for kink in line
jcross199
Profile picture for user jcross199
Posts
8
Joined
11/28/2021
Location
Veneta, OR US
jcross199 11/29/2021 7:05am
11/29/2021 7:05am
In the fuel line? That shouldn’t make the bike seem like the electric start or battery is dead but I will check

The Shop

See All »
Factor E
Profile picture for user Factor E
Posts
939
Joined
9/22/2011
Location
So Cal, CA US
Factor E 11/29/2021 7:17am
11/29/2021 7:17am
Try at the starter relay and see if when you make connection with the power cables and see if it cranks over.
Unplug ECU then plug back in
jcross199
Profile picture for user jcross199
Posts
8
Joined
11/28/2021
Location
Veneta, OR US
jcross199 11/29/2021 7:34am
11/29/2021 7:34am
Factor E wrote:
Try at the starter relay and see if when you make connection with the power cables and see if it cranks over. Unplug ECU then plug...
Try at the starter relay and see if when you make connection with the power cables and see if it cranks over.
Unplug ECU then plug back in
I will have to try that after work today
Zycki11
Profile picture for user Zycki11
Posts
7695
Joined
4/1/2008
Location
Edwardsville, IL US
Zycki11 11/30/2021 1:23pm
11/30/2021 1:23pm
Also check the easy stuff. Check the kill switch for a short.
jcross199
Profile picture for user jcross199
Posts
8
Joined
11/28/2021
Location
Veneta, OR US
jcross199 11/30/2021 4:15pm
11/30/2021 4:15pm
Zycki11 wrote:
Also check the easy stuff. Check the kill switch for a short.
Will do, thanks for the tip

Post a reply to: 2020 yz250f not starting