KTM radiator braces

Rickyisms
Edited Date/Time 1/12/2021 7:22pm
What is everyone running on their KTM for radiator protection? I always used Works connection braces on my Jap bikes but looks like they're not available for the European bikes.
|
TyRod
Profile picture for user TyRod
Posts
115
Joined
4/9/2020
Location
USA
TyRod 1/11/2021 7:48am
1/11/2021 7:48am
I just ordered a set from Unabiker for my 300xc. Would have preferred a set of billet ones, but didn't really feel the need to spend that much money. The quality on the Unabiker set looked good.
1
Rickyisms 1/11/2021 8:16am
1/11/2021 8:16am
TyRod wrote:
I just ordered a set from Unabiker for my 300xc. Would have preferred a set of billet ones, but didn't really feel the need to spend...
I just ordered a set from Unabiker for my 300xc. Would have preferred a set of billet ones, but didn't really feel the need to spend that much money. The quality on the Unabiker set looked good.
Will look into them, thanks.
LungButter
Profile picture for user LungButter
Posts
8684
Joined
1/9/2016
Location
Yellow Pine, ID, USA
LungButter 1/11/2021 8:26am
1/11/2021 8:26am
I went with the ICW bracing on mine for $120 instead of bolting on some big heavy guards. I understand they don't cover the front of the radiators like some of the guards, but in over 25 years of riding and racing off road, I've never had something poke through the front of my radiator.


3

The Shop

See All »
mattman631
Profile picture for user mattman631
Posts
330
Joined
12/16/2015
Location
Mcalester, OK, USA
mattman631 1/11/2021 8:59am
1/11/2021 8:59am
cdncombatmedic wrote:
Bullet Proof Designs
X2 on the BPD. These things are legit and install in 5 minutes or less
1
Rickyisms 1/11/2021 10:37am
1/11/2021 10:37am
LungButter wrote:
I went with the ICW bracing on mine for $120 instead of bolting on some big heavy guards. I understand they don't cover the front of...
I went with the ICW bracing on mine for $120 instead of bolting on some big heavy guards. I understand they don't cover the front of the radiators like some of the guards, but in over 25 years of riding and racing off road, I've never had something poke through the front of my radiator.


Not really worried about something poking through, more concerned with dropping the bike and tweaking them, the bracing from ICW looks legit, can you still use the stock louvers?
2
mattman631
Profile picture for user mattman631
Posts
330
Joined
12/16/2015
Location
Mcalester, OK, USA
mattman631 1/11/2021 11:03am
1/11/2021 11:03am
Rickyisms wrote:
Not really worried about something poking through, more concerned with dropping the bike and tweaking them, the bracing from ICW looks legit, can you still use...
Not really worried about something poking through, more concerned with dropping the bike and tweaking them, the bracing from ICW looks legit, can you still use the stock louvers?
Yes, Ive used ICW braced radiators in the past and your louvers will mount as normal. ICW does great work, I had a set on a YZ250 that I used on 3 different bikes and never bent them.
3
Spooner
Profile picture for user Spooner
Posts
2448
Joined
1/8/2011
Location
Kansas City, MO, USA
Spooner 1/11/2021 11:12am
1/11/2021 11:12am
cdncombatmedic wrote:
Bullet Proof Designs
mattman631 wrote:
X2 on the BPD. These things are legit and install in 5 minutes or less
X50. If you want the best these are easily it. Made in USA too!
1
cdncombatmedic 1/11/2021 11:15am
1/11/2021 11:15am
cdncombatmedic wrote:
Bullet Proof Designs
mattman631 wrote:
X2 on the BPD. These things are legit and install in 5 minutes or less
Spooner wrote:
X50. If you want the best these are easily it. Made in USA too!
Great customer service as well. They have an amazing warranty and will replace them if they are damaged.
2
LungButter
Profile picture for user LungButter
Posts
8684
Joined
1/9/2016
Location
Yellow Pine, ID, USA
LungButter 1/11/2021 11:37am
1/11/2021 11:37am
Rickyisms wrote:
Not really worried about something poking through, more concerned with dropping the bike and tweaking them, the bracing from ICW looks legit, can you still use...
Not really worried about something poking through, more concerned with dropping the bike and tweaking them, the bracing from ICW looks legit, can you still use the stock louvers?
Yes sir.

Way tricker option if you can stomach a little extra investment.
2
digby.chickencaesar.5 1/11/2021 1:36pm
1/11/2021 1:36pm
What do people think of the KTM PowerParts rad braces? The guy I bought my bike from had bought them for it, are they crap, or just too expensive for most to recommend?
BH57
Profile picture for user BH57
Posts
10
Joined
11/1/2014
Location
Sarnia, CA
BH57 1/11/2021 2:00pm
1/11/2021 2:00pm
I'm using Enduro Engineering braces on my 16 450SX-F for the last three years. No issues and I've fallen many times.
1
Kanewel433
Profile picture for user Kanewel433
Posts
204
Joined
4/27/2017
Location
Summerville, SC, USA
Kanewel433 1/12/2021 11:04am
1/12/2021 11:04am
Another upvote for ICW - Brett does fantastic work. I've had him reinforce/frame 3 sets of radiators and never had a single issue since.

I bought the bullet proof designs braces for my current FC350 - and while they do fit under the stock shrouds, it does make them bulge out just a tad at the top.
Pirate421
Profile picture for user Pirate421
Posts
1826
Joined
7/26/2015
Location
USA
Pirate421 1/12/2021 6:47pm
1/12/2021 6:47pm Edited Date/Time 1/12/2021 6:48pm
digby.chickencaesar.5 wrote:
What do people think of the KTM PowerParts rad braces? The guy I bought my bike from had bought them for it, are they crap, or...
What do people think of the KTM PowerParts rad braces? The guy I bought my bike from had bought them for it, are they crap, or just too expensive for most to recommend?
I bought a set. They seemed ok and lined up bolts fine but the fender hits them when you turn the bars. Enough so that you’d probably have to take 3/8” or so off the back of the front fender. No way to trim the actual braces since it’s right in the thickest part of the brace. I took them off because it drove me nuts having the fender get caught on them every time I turned the bars
Farmer Tom
Profile picture for user Farmer Tom
Posts
50
Joined
10/23/2016
Location
Kalkaska, MI, USA
Farmer Tom 1/12/2021 6:53pm
1/12/2021 6:53pm
I second the Enduro Engineering braces. Very high quality and they take a beating. They also have front guards that bolt on to the braces I believe?
Langhammx 1/12/2021 7:22pm
1/12/2021 7:22pm
BulletProof Designs on all of my off-road bikes. The best customer service in the business and quality is unmatched.
I have had Bret at ICW do many sets of radiators on my motocross bikes and he does a great job and no issues.

Post a reply to: KTM radiator braces