2019 Kx450 Clutch

Livermore_717
Profile picture for user Livermore_717
Posts
21
Joined
6/15/2019
Location
Canandaigua, NY, USA
Livermore_717
Alrighty hopefully someone can possibly tell me what's going on here, I have a 2012 Kx450 with a full hinson clutch in it, rather then just leave it in that bike I would like to use it in my 2019 kx 450 the clutch basket part number matches up, the inner hub and pressure plate also have the same name part # but they put -IP-0602 is there anyone that can help with what that IP-0602 means after the part number would like to use this clutch in my 2019 if it works, Thank You
|
motoxracer17 10/13/2020 4:46pm
10/13/2020 4:46pm
Everything should be fine to swap over. From my understanding the only thing you will need to change is the gear on the back of it. Since the 19 has electric start the gear on the back of the outer basket is a different size. That’s what I was told by Hinson, I also have a 12 and was asking them if it would swap over when I upgraded to a new model.
1
Livermore_717
Profile picture for user Livermore_717
Posts
21
Joined
6/15/2019
Location
Canandaigua, NY, USA
Livermore_717 10/14/2020 9:37am
10/14/2020 9:37am
motoxracer17 wrote:
Everything should be fine to swap over. From my understanding the only thing you will need to change is the gear on the back of it...
Everything should be fine to swap over. From my understanding the only thing you will need to change is the gear on the back of it. Since the 19 has electric start the gear on the back of the outer basket is a different size. That’s what I was told by Hinson, I also have a 12 and was asking them if it would swap over when I upgraded to a new model.
Thank you! I'll will have to pull them out and check them out and check it out thank you!

Post a reply to: 2019 Kx450 Clutch