Posts
840
Joined
8/16/2006
Location
Sparta, WI, USA
Edited Date/Time
1/27/2012 7:49pm
Deal with it.
Bike is in mint condition. It had just 17 hours on it before I took the hour meter off March 2nd. It has about 10 hours of use since.
Just put a bunch of new stuff on it for a trip to Florida. Those parts are listed below.
-Brand new top end
-Brand new clutch
-Brand new Bridgestone tires
-Brand new Renthal sprockets
-Brand new Regina chain
-Brand new Renthal grips
The bike will have the stock plastic installed.
I installed a Race Tech progressive spring for the rear shock. Buyer can have that or I can install the stock spring if they desire. The forks aren't stock. The internals are some stuff done by Smart Performance, and were the first ones built. In a nutshell, they were used as a prototype for some high-end stuff the guy does for KTM suspension. They work excellent!!
The cylinder has been ported by Jesse Williams of Williams Motowerx.
The bike will have the stock exhaust, which has the above mentioned 10 approximate hours, in addition to the first 3 hours the bike was ran. It is 100% free of dents.
The bars are Renthal and are the stock bend.
Oil has been changed every 2-3 hours of use.
I'm not sure what to ask as far as a price goes, so I'm open to all serious offers.
(608) 487-6661
This is what the bike looked like last fall.

Bike is in mint condition. It had just 17 hours on it before I took the hour meter off March 2nd. It has about 10 hours of use since.
Just put a bunch of new stuff on it for a trip to Florida. Those parts are listed below.
-Brand new top end
-Brand new clutch
-Brand new Bridgestone tires
-Brand new Renthal sprockets
-Brand new Regina chain
-Brand new Renthal grips
The bike will have the stock plastic installed.
I installed a Race Tech progressive spring for the rear shock. Buyer can have that or I can install the stock spring if they desire. The forks aren't stock. The internals are some stuff done by Smart Performance, and were the first ones built. In a nutshell, they were used as a prototype for some high-end stuff the guy does for KTM suspension. They work excellent!!
The cylinder has been ported by Jesse Williams of Williams Motowerx.
The bike will have the stock exhaust, which has the above mentioned 10 approximate hours, in addition to the first 3 hours the bike was ran. It is 100% free of dents.
The bars are Renthal and are the stock bend.
Oil has been changed every 2-3 hours of use.
I'm not sure what to ask as far as a price goes, so I'm open to all serious offers.
(608) 487-6661
This is what the bike looked like last fall.

The Shop
Free shipping: VITALMX
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Luxon 4-Post Bar Mounts
$189.95 - $239.95
My absolute bottom dollar is $3,500. In my opinion, that's a smoking deal for this bike.
Pit Row
The bike is in great shape. My son practiced it a week down south and raced it once up here in michigan.
Andy is Begging to run it but, Cody won't let him touch it.
Post a reply to: SPAM...2008 KTM 144SX for sale.