150 compete with a 250 4 banger?

BobbyM
Posts
21439
Joined
8/15/2006
Location
USA
Apparently...
ya think?
3
|
Press516
Posts
5802
Joined
9/11/2018
Location
Gilbert, AZ, USA
Fantasy
6/28/2019 11:12am
I think we've seen this story a few times...

Same HP, less torque and a much smaller power band. So, want to work harder to make it go fast? Sure, the 150 runs right with the 250F's. I think the rules need to be changed to allow the 150's in the 250 class... But the wise choice for a racer is going to be the 250F. JMHO
1
2
-MAVERICK-
Posts
66859
Joined
3/26/2015
Location
Ontario, CA
6/28/2019 11:16am
Press516 wrote:
I think we've seen this story a few times... Same HP, less torque and a much smaller power band. So, want to work harder to make...
I think we've seen this story a few times...

Same HP, less torque and a much smaller power band. So, want to work harder to make it go fast? Sure, the 150 runs right with the 250F's. I think the rules need to be changed to allow the 150's in the 250 class... But the wise choice for a racer is going to be the 250F. JMHO
"think the rules need to be changed to allow the 150's in the 250 class."

Needs to change so it's 250 2t vs. 250 4t.
32
CivBars
Posts
1472
Joined
4/13/2019
Location
USA
6/28/2019 12:11pm
They have 4 cylinder bikes in the UK?
1

The Shop

6/28/2019 12:14pm
-MAVERICK- wrote:
"think the rules need to be changed to allow the 150's in the 250 class."

Needs to change so it's 250 2t vs. 250 4t.
When I had my 250sx I didn’t pull every hole shot. Nor did I always pull people down the straights. Where I had an advantage was being able to work on my bike for $0 and also sounding cool as fuck. Otherwise they’re on a very even playing field.
13
-MAVERICK-
Posts
66859
Joined
3/26/2015
Location
Ontario, CA
6/28/2019 12:30pm
-MAVERICK- wrote:
"think the rules need to be changed to allow the 150's in the 250 class."

Needs to change so it's 250 2t vs. 250 4t.
When I had my 250sx I didn’t pull every hole shot. Nor did I always pull people down the straights. Where I had an advantage was...
When I had my 250sx I didn’t pull every hole shot. Nor did I always pull people down the straights. Where I had an advantage was being able to work on my bike for $0 and also sounding cool as fuck. Otherwise they’re on a very even playing field.
3
IanMac138
Posts
400
Joined
7/30/2018
Location
West Linn, OR, USA
6/28/2019 1:23pm
Love my '19 150SX. Learning curve to be sure in order to ride it to it's potential but man, always have a smile on my face especially screaming past a 4t making the rider look around like 'wtf was that!?".
3
HusqFan3
Posts
719
Joined
4/30/2018
Location
Sammamish, WA, USA
6/28/2019 1:25pm
Interesting topic. Surprised this hasn’t been mentioned/discussed on the forum up until now. Not sure about the 150T vs 250f but since we’re broaching unexplored topics, would love to hear people’s thoughts on the US Nationals vs MXGP?
6
Press516
Posts
5802
Joined
9/11/2018
Location
Gilbert, AZ, USA
Fantasy
6/28/2019 3:21pm
Press516 wrote:
I think we've seen this story a few times... Same HP, less torque and a much smaller power band. So, want to work harder to make...
I think we've seen this story a few times...

Same HP, less torque and a much smaller power band. So, want to work harder to make it go fast? Sure, the 150 runs right with the 250F's. I think the rules need to be changed to allow the 150's in the 250 class... But the wise choice for a racer is going to be the 250F. JMHO
-MAVERICK- wrote:
"think the rules need to be changed to allow the 150's in the 250 class."

Needs to change so it's 250 2t vs. 250 4t.
Ok, I think I can support that... But now you've got 50HP to 40HP. That's a pretty big delta.
1
6/28/2019 4:26pm
Press516 wrote:
Ok, I think I can support that... But now you've got 50HP to 40HP. That's a pretty big delta.
Power and frame management. Where the bikes make 50 HP vs 43 HP plus traction delivery are extremely different, and take two very different skill sets. I’m great at working around low torque and lots of top, with zero compression braking and a flexible steel frame. I’m not the best at maneuvering a bike that stops when you let off the gas and all of the chassis characteristics that come with aluminum.

One is not better than the other for all, one is better than the other for me. I honestly do not believe Justin Cooper for example could ride a fully tuned and kitted YZ250 at the speed that he could a YZF for race duration. They’re not for everyone.
2
6/28/2019 5:26pm
HusqFan3 wrote:
Interesting topic. Surprised this hasn’t been mentioned/discussed on the forum up until now. Not sure about the 150T vs 250f but since we’re broaching unexplored topics...
Interesting topic. Surprised this hasn’t been mentioned/discussed on the forum up until now. Not sure about the 150T vs 250f but since we’re broaching unexplored topics, would love to hear people’s thoughts on the US Nationals vs MXGP?
You're using strong bait, but I think your cast ran a bit short. Wink
2
lengyel395
Posts
42
Joined
6/25/2014
Location
Maple lake, MN, USA
6/28/2019 6:08pm
That style track is perfect conditions for the 2 stroke as well. If they wouldn't dig the American tracks 3ft deep, 2 strokes would have more of a fighting chance in the outdoors. I get they were fairly new in development at the time, but look at early 2000s Nationals when the tracks weren't so deep and see how much better the 2 strokes handled around the track and how much faster they could approach the corner and carry their moment around the 4 strokes. Nowadays it would only be fair to run even number displacement in the 250 class between the 250t and 250f. Obviously 250t are no match for 450s in the 450 class.
2
AZRider
Posts
412
Joined
6/14/2016
Location
Rock Spring, GA, USA
6/28/2019 6:18pm
lengyel395 wrote:
That style track is perfect conditions for the 2 stroke as well. If they wouldn't dig the American tracks 3ft deep, 2 strokes would have more...
That style track is perfect conditions for the 2 stroke as well. If they wouldn't dig the American tracks 3ft deep, 2 strokes would have more of a fighting chance in the outdoors. I get they were fairly new in development at the time, but look at early 2000s Nationals when the tracks weren't so deep and see how much better the 2 strokes handled around the track and how much faster they could approach the corner and carry their moment around the 4 strokes. Nowadays it would only be fair to run even number displacement in the 250 class between the 250t and 250f. Obviously 250t are no match for 450s in the 450 class.
The sad part is that the only reason tracks are so deep now is to slow the field down. Seems they sorta shot themselves in the foot.
1
ShipLap
Posts
1673
Joined
8/15/2018
Location
Moab, UT, USA
6/28/2019 6:19pm Edited Date/Time 6/28/2019 6:25pm
Awesome sound and even more awesome outcome !!

Thanks Bobb
6/28/2019 6:35pm
IanMac138 wrote:
Love my '19 150SX. Learning curve to be sure in order to ride it to it's potential but man, always have a smile on my face...
Love my '19 150SX. Learning curve to be sure in order to ride it to it's potential but man, always have a smile on my face especially screaming past a 4t making the rider look around like 'wtf was that!?".
ran in my 2019 150SX today, had a ball, had a 2018 125sx before this and love the 150,
1
6/28/2019 6:41pm
IanMac138 wrote:
Love my '19 150SX. Learning curve to be sure in order to ride it to it's potential but man, always have a smile on my face...
Love my '19 150SX. Learning curve to be sure in order to ride it to it's potential but man, always have a smile on my face especially screaming past a 4t making the rider look around like 'wtf was that!?".
I have an ‘18 150SX with <10 hrs on it. Let’s rip some time.
1
IanMac138
Posts
400
Joined
7/30/2018
Location
West Linn, OR, USA
6/28/2019 9:15pm
I have an ‘18 150SX with <10 hrs on it. Let’s rip some time.
Let's do it! I live in West Linn so we aren't too far apart. Always looking for good dudes to ride with. I'm planning on hitting Albany practice alongside Jeffro503 on Sunday, 9am-2pm. Good people. Never ridden Albany yet but stoked to try it out. PM and let's link up Sunday or soon after.
1
6/29/2019 12:01pm
IanMac138 wrote:
Let's do it! I live in West Linn so we aren't too far apart. Always looking for good dudes to ride with. I'm planning on hitting...
Let's do it! I live in West Linn so we aren't too far apart. Always looking for good dudes to ride with. I'm planning on hitting Albany practice alongside Jeffro503 on Sunday, 9am-2pm. Good people. Never ridden Albany yet but stoked to try it out. PM and let's link up Sunday or soon after.
PM sent!
ShipLap
Posts
1673
Joined
8/15/2018
Location
Moab, UT, USA
6/29/2019 2:55pm
They should make the following changes:

150 SX and MX class.
Allow 250 two strokes against 250 four strokes.
Allow 300 two strokes against the 450 behemoths.

Dirt Cycle racing would get INTERESTING again.
(and sound better too)
Bennett59
Posts
865
Joined
9/3/2015
Location
Bakersfield, CA, USA
6/29/2019 5:39pm
Mammoth Mountain 2-Stroke Fmf Open Brock Bennett was on 150cc against 125-500cc with second after going down in the back also.
mxb2
Posts
22437
Joined
6/15/2010
Location
Bowie, MD, USA
6/29/2019 5:53pm
ShipLap wrote:
They should make the following changes: 150 SX and MX class. Allow 250 two strokes against 250 four strokes. Allow 300 two strokes against the 450...
They should make the following changes:

150 SX and MX class.
Allow 250 two strokes against 250 four strokes.
Allow 300 two strokes against the 450 behemoths.

Dirt Cycle racing would get INTERESTING again.
(and sound better too)
And people would still complain.

Post a reply to: 150 compete with a 250 4 banger?

The Latest