Built 2004 CR125

dylanv21
Profile picture for user dylanv21
Posts
412
Joined
10/3/2013
Location
Fresno, CA, USA
dylanv21
Edited Date/Time 6/11/2019 6:05pm
04 CR125

Selling because my wife got a job up in PNW and we have to be up there in July.

I did a full build thread on this bike when I built it. Not really sure what it’s worth, I do know what I have into it and don’t want to loose too much money on it...

Link: https://m.vitalmx.com/forums/Bike-Builds,46/2004-CR125,1330977?page=4

Bike currently only has 13 hours on it and is located in Central CA. Open to reasonable offers. Pictures are from when I first built it with the 2008 forks. Now has the 2016 front end on.

Motor/Intake/Cooling:
-Oem crank
-Oem gaskets, seals, and bearings
-134 big bore; Wiseco piston and work done by Millennium Technologies
-Hinson basket, inner hub, and pressure plate
-Oem clutch fibers, steels, and springs
-V force 3 reeds
-Twin Air air filter and bolt
-Oem case bolts
-Covers are cerakoted
-Bud racing header and carbon fiber silencer
-Oem servo motor
-GPI radiator hoses
-Stock radiators braced
-Stock carburetor; pro circuit jet specs

Suspension:
-2008 CRF250R steering dampener
-2016 CRF250R triple clamps
-2016 CRF250R front forks; rebuilt with SKF seals
-Stock cr125 shock; anodized black
-Racetech springs; rear is painted a candy apple red

Brakes:
-Galfer oversized wave front rotor
-Galfer wave rear rotor
-Galfer brake pads
-Galfer steel braided brake lines
-HRC front brake line clamp
-Newer CRF rear caliper guard
-Newer CRF rear disc guard
-2008 CRF250R front master cylinder

Wheels/Drive:
-Stock hubs;cerakoted
-Pro Wheel heavy duty spokes
-DID Dirtstar Rims
-Motion Pro rim locks
-All Balls wheel bearings
-Dunlop Mx3s tires
-IRC heavy duty tubes
-Renthal sprockets
-Renthal chain
-Flo Motorsports Ti sprocket bolts
-TM Designs chain guide

Controls:
-Works Connection clutch perch
-Works Connection brake lever
-Renthal twinwall handlebars
-Renthal oversized bar mounts
-Renthal grips
-Bud Racing shift lever
-Raptor Ti footpegs

Miscellaneous:
-Cycra front fender and stadium plate
-Acerbis fork guards, shrouds, side number plates, and rear fender
-Polisport radiator louvers
-Olmy Creation graphics and seat cover
-Oem bolts throughout
-MotoTape frame grip tape

I’m sure I missed some stuff, but that’s most of it.











3
|
dylanv21
Profile picture for user dylanv21
Posts
412
Joined
10/3/2013
Location
Fresno, CA, USA
dylanv21 5/22/2019 3:45pm
5/22/2019 3:45pm
Obo.
plani67
Profile picture for user plani67
Posts
82
Joined
11/20/2018
Location
Simi Valley, CA, USA
plani67 5/22/2019 4:04pm
5/22/2019 4:04pm
dylanv21 wrote:
Obo.
What’s the price?
dylanv21
Profile picture for user dylanv21
Posts
412
Joined
10/3/2013
Location
Fresno, CA, USA
dylanv21 5/22/2019 5:25pm
5/22/2019 5:25pm
plani67 wrote:
What’s the price?
Shoot me a text. 559-301-7491
1
MaxPower
Profile picture for user MaxPower
Posts
2701
Joined
8/15/2006
Location
USA
MaxPower 5/22/2019 8:10pm
5/22/2019 8:10pm
Bikes listed with out price gives me the same feeling buying a time share.
You have a number you nred to get then list it.
6

The Shop

See All »
dylanv21
Profile picture for user dylanv21
Posts
412
Joined
10/3/2013
Location
Fresno, CA, USA
dylanv21 5/25/2019 12:43pm
5/25/2019 12:43pm Edited Date/Time 5/25/2019 12:44pm
Open to offers. Started at 6K, have WAY more then that into it. Just trying to recoup most of my money back out of it so it makes moving to WA alittle less stressful...

Motivated seller.... Text or call me if interested.



For the right price, I have another set of wheels to go with it; nothing special.. Was going to build the other set to match whats on the bike so I have a back up pair. Also have the stock suspension to go with it...
1
dylanv21
Profile picture for user dylanv21
Posts
412
Joined
10/3/2013
Location
Fresno, CA, USA
dylanv21 5/30/2019 5:57pm
5/30/2019 5:57pm
Anyone?
bm201
Profile picture for user bm201
Posts
271
Joined
11/8/2017
Location
Fairport, NY, USA
bm201 5/30/2019 6:37pm
5/30/2019 6:37pm
This isn’t a bash post by any means so don’t take it that way, I think your a few grand high. 2004 was the worst motor and I know you have a bunch in upgrades but hardly do we ever see any of that on the back end in this sport. I’m building an 05 for a 125 dream race that will be nearly identical to yours (replace exhaust with fmf and no icw radiators) and I’m hoping to recoup $3500 when I sell it. Again, sick bike definitely well done, I just feel you’re about $2g high but am wrong everyday so I could be here as well. Best of luck selling man.
1
plani67
Profile picture for user plani67
Posts
82
Joined
11/20/2018
Location
Simi Valley, CA, USA
plani67 5/30/2019 7:38pm
5/30/2019 7:38pm Edited Date/Time 5/31/2019 11:08am
Let me know when you decide to sell it $3500.
zuk338
Profile picture for user zuk338
Posts
204
Joined
5/22/2017
Location
North Tonawanda, NY, USA
zuk338 6/1/2019 10:39am
6/1/2019 10:39am
bm201 wrote:
This isn’t a bash post by any means so don’t take it that way, I think your a few grand high. 2004 was the worst motor...
This isn’t a bash post by any means so don’t take it that way, I think your a few grand high. 2004 was the worst motor and I know you have a bunch in upgrades but hardly do we ever see any of that on the back end in this sport. I’m building an 05 for a 125 dream race that will be nearly identical to yours (replace exhaust with fmf and no icw radiators) and I’m hoping to recoup $3500 when I sell it. Again, sick bike definitely well done, I just feel you’re about $2g high but am wrong everyday so I could be here as well. Best of luck selling man.
Yup he’s got it right here. Your best bet to recoup as much as possible would be to part it out unfortunately.
seth505
Profile picture for user seth505
Posts
10214
Joined
4/1/2008
Location
SD, CA, USA
seth505 6/1/2019 12:13pm
6/1/2019 12:13pm
Im building an 05 as well right now and sold a minty 03 last year for 2500. I think that was too low for how much I had into it but youre on the high end imo. Sweetbike tho, good luck!
1
dylanv21
Profile picture for user dylanv21
Posts
412
Joined
10/3/2013
Location
Fresno, CA, USA
dylanv21 6/2/2019 9:00pm
6/2/2019 9:00pm
Trust me boys, I know I’m on the high side. I dont need to sell this bike. If I needed to, trust me it wouldn’t me priced that high. I’m just trying to recoup most of my money to have some extra to move to the PNW. If it sells, great. If it doesn’t, I’ll hang on to it.

But if anyone on vital wants it, I’ll make a deal. I know what I’m asking is crazy. Like i said, just trying to recoup to have a security blanket.
1
dylanv21
Profile picture for user dylanv21
Posts
412
Joined
10/3/2013
Location
Fresno, CA, USA
dylanv21 6/4/2019 5:48pm
6/4/2019 5:48pm
$5500???
Tryhard
Profile picture for user Tryhard
Posts
548
Joined
6/6/2017
Location
USA
Tryhard 6/4/2019 10:27pm
6/4/2019 10:27pm
My dream bike not the correct year , but what a awesome build dude . Glws and move !
dylanv21
Profile picture for user dylanv21
Posts
412
Joined
10/3/2013
Location
Fresno, CA, USA
dylanv21 6/5/2019 7:39am
6/5/2019 7:39am
Tryhard wrote:
My dream bike not the correct year , but what a awesome build dude . Glws and move !
Thanks buddy!
dylanv21
Profile picture for user dylanv21
Posts
412
Joined
10/3/2013
Location
Fresno, CA, USA
dylanv21 6/6/2019 5:10pm
6/6/2019 5:10pm
Bump.
dylanv21
Profile picture for user dylanv21
Posts
412
Joined
10/3/2013
Location
Fresno, CA, USA
dylanv21 6/7/2019 6:58am
6/7/2019 6:58am
$5500, and I’ll include another set of wheels, stock forks, forest approved silencer, clear desert tank, extra rear axle, shrouds, air filter, spark plug, pipe springs, vortex ignition(was robbed off an 03 I had, not sure if it works on 04’s), miscellaneous oem bolts, front sprocket.

Would like to sell before I moved. Let’s make a deal. 559-301-7491
dylanv21
Profile picture for user dylanv21
Posts
412
Joined
10/3/2013
Location
Fresno, CA, USA
dylanv21 6/7/2019 7:02am
6/7/2019 7:02am
Wheels I bought how they sit, my plan was to make a matching set that’s on the bike so I can just swap when there is a flat whenever and not have to mess with a flat at the track or whatever. But never got around to building the wheel set the way I wanted. Totally usable the way they are right now though.
dylanv21
Profile picture for user dylanv21
Posts
412
Joined
10/3/2013
Location
Fresno, CA, USA
dylanv21 6/11/2019 6:05pm
6/11/2019 6:05pm
$5200

Post a reply to: Built 2004 CR125