quick question on my 450 sx-f

booma1218
Posts
77
Joined
3/15/2016
Location
tewksbury, MA US
I just picked up my 2017 450sx-f and I got the FMF slip on for it...Do i need to flash the ECU for just adding the slip on without the header pipe?
|
Matt6505
Posts
44
Joined
11/29/2016
Location
AU
4/6/2017 5:31pm
You should be good to go man, from what I was told only needed for the full system
ML512
Posts
16856
Joined
12/28/2008
Location
Wildomar, CA US
Fantasy
4/6/2017 5:36pm
booma1218 wrote:
I just picked up my 2017 450sx-f and I got the FMF slip on for it...Do i need to flash the ECU for just adding the...
I just picked up my 2017 450sx-f and I got the FMF slip on for it...Do i need to flash the ECU for just adding the slip on without the header pipe?
It'll run fine. ECU tuning can always be beneficial but you shouldn't really notice any negatives without it.
booma1218
Posts
77
Joined
3/15/2016
Location
tewksbury, MA US
4/6/2017 5:39pm
Thank you guys
Justin345
Posts
643
Joined
6/26/2014
Location
Southern MD, MD US
4/6/2017 5:41pm
Tokyo mods can flash your ECU for right around $100 and a day turn around time. Can't beat it. Like ML said though, you don't need to. But it will run better with the ECU mapped for the exhaust.

The Shop

CarlinoJoeVideo
Posts
7519
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
4/6/2017 9:48pm
The exhaust manufacturers make the exhaust using stock mapping, bolt on setup.

However, if you did a remap you might gain a little more. Reach out to Twisted Development, they have some great maps!

Post a reply to: quick question on my 450 sx-f

The Latest