2001 RM125 build - Pastrana Replica

Schuster187 12/28/2016 9:47am
12/28/2016 9:47am
I have a few little pieces I am still looking for to finish off the bike. Maybe someone will have them:

- I have been sent the wrong brake hanger twice on Ebay. If anyone has a 2001 RM125 brake hanger to work with a 280mm rotor let me know

- I am looking for the correct RG3/Showa fork and shock stickers. The ones I currently have are carbon background and I would like them to be clear background. I contacted RG3 a couple times and have been waiting on a call back to get some ordered but never got the call. I figured I would see if anyone on here may have some before I try them back again.
Mxrichart
Profile picture for user Mxrichart
Posts
10
Joined
12/15/2016
Location
ES
Mxrichart 12/28/2016 10:17am
12/28/2016 10:17am
Schuster187 wrote:
I have a few little pieces I am still looking for to finish off the bike. Maybe someone will have them: - I have been sent...
I have a few little pieces I am still looking for to finish off the bike. Maybe someone will have them:

- I have been sent the wrong brake hanger twice on Ebay. If anyone has a 2001 RM125 brake hanger to work with a 280mm rotor let me know

- I am looking for the correct RG3/Showa fork and shock stickers. The ones I currently have are carbon background and I would like them to be clear background. I contacted RG3 a couple times and have been waiting on a call back to get some ordered but never got the call. I figured I would see if anyone on here may have some before I try them back again.
Look here.
http://www.stormgrafix.co.uk/fork-graphics/
Travis_Hudson 12/31/2016 7:21am
12/31/2016 7:21am
Schuster187 wrote:
I bought an RM125 a couple months ago that I wanted to replicate an '01 RM factory bike the best that I could. Here are a...
I bought an RM125 a couple months ago that I wanted to replicate an '01 RM factory bike the best that I could. Here are a few before and after pics... Hope you enjoy!

Before



After






Mother of god.........

The Shop

See All »
RussB
Profile picture for user RussB
Posts
988
Joined
7/12/2014
Location
GB
RussB 2/21/2017 1:42am
2/21/2017 1:42am
Schuster187 - Where did you get your drilled washers? Particularly the ones used for the fork guard bolts?

Stunning build! What else can I say that hasn't already been said, simply awesome.
Schuster187 2/21/2017 12:31pm
2/21/2017 12:31pm
Ranger08082012 wrote:
If you are still after an RG3 clamp setup, this is a cheap start. Top clamp + 1 1/8" bar mounts for $50 in Ottawa.

http://www.kijiji.ca/v-dirt-bikes-motocross/ottawa/rg3-top-tripple-clam…




Thanks for the info, the link doesn't take me to the clamps, send me an email - derek@hondamx.ca
Schuster187 2/21/2017 12:35pm
2/21/2017 12:35pm
RussB wrote:
Schuster187 - Where did you get your drilled washers? Particularly the ones used for the fork guard bolts? Stunning build! What else can I say that...
Schuster187 - Where did you get your drilled washers? Particularly the ones used for the fork guard bolts?

Stunning build! What else can I say that hasn't already been said, simply awesome.
The washers are made by Bolt http://boltmotorcyclehardware.com

I had them anodized to match the other anodized pieces on the bike
Schuster187 2/21/2017 12:45pm
2/21/2017 12:45pm
Thanks to Jolene VanVugt I recently had Travis sign the front plate.



2
7446pats
Profile picture for user 7446pats
Posts
318
Joined
12/21/2010
Location
GB
7446pats 2/21/2017 1:34pm
2/21/2017 1:34pm
Perfect!
barkhard696
Profile picture for user barkhard696
Posts
1469
Joined
1/30/2010
Location
Houston, TX US
barkhard696 2/22/2017 6:08pm
2/22/2017 6:08pm Edited Date/Time 2/22/2017 7:14pm
This build wins. It makes my 03 SoBe bike look like a poodle. On the brake hanger, that's easy. Suzuki/Honda/Kawasaki all used the same hanger. In 04 Honda went to a narrower bolt spacing (likely to save weight). Just get a 95-03 CR/CRF 280mm hanger, MotoStuff.com has them, or get any Kawie 2t one. BTW, Yamaha has the same hub bolt pattern, so the rotors interchange. I have a YZ front rotor and a pre 04 CR spacer on mine.



2
Jmicmoto13 2/23/2017 4:14pm
2/23/2017 4:14pm
barkhard696 wrote:
This build wins. It makes my 03 SoBe bike look like a poodle. On the brake hanger, that's easy. Suzuki/Honda/Kawasaki all used the same hanger. In...
This build wins. It makes my 03 SoBe bike look like a poodle. On the brake hanger, that's easy. Suzuki/Honda/Kawasaki all used the same hanger. In 04 Honda went to a narrower bolt spacing (likely to save weight). Just get a 95-03 CR/CRF 280mm hanger, MotoStuff.com has them, or get any Kawie 2t one. BTW, Yamaha has the same hub bolt pattern, so the rotors interchange. I have a YZ front rotor and a pre 04 CR spacer on mine.



Do you have a build thread for that beauty?
barkhard696
Profile picture for user barkhard696
Posts
1469
Joined
1/30/2010
Location
Houston, TX US
barkhard696 2/24/2017 6:09am
2/24/2017 6:09am
Yes. It's old but I add to it from time to time. It should be under 2004 RM250 or SoBe.
mxr1der34
Profile picture for user mxr1der34
Posts
81
Joined
1/6/2017
Location
Los Angeles, CA US
mxr1der34 4/8/2017 11:29am
4/8/2017 11:29am
Such a nice build man! Looking at the fork lugs, they don't appear to be stock 01 lugs. Are those billet lugs that you had hard anodized or is the suspension from a different bike? I also have a guy who imports carbon fiber ignition covers from italy for rm125/250's. (https://www.instagram.com/p/BFCHUT9vMWz/?taken-by=froscycles)

I asked for some clutch covers as well, but I think his supplier needs a larger order. At $100 a piece I'd imagine we could get enough people on here to place a large order.
JChambers48 4/9/2017 5:33pm
4/9/2017 5:33pm
Such an amazing job! I actually brushed past the finished pics as i thought they were the inspiration pics! well done.
Mxrichart
Profile picture for user Mxrichart
Posts
10
Joined
12/15/2016
Location
ES
Mxrichart 2/1/2018 2:20am
2/1/2018 2:20am
Hello Schuster187, the frame protectors where did you buy them? Thank you.
endo
Profile picture for user endo
Posts
244
Joined
4/1/2008
Location
Sarasota, FL US
endo 2/2/2018 1:32pm
2/2/2018 1:32pm
Dude I think that is the best build I have EVER seen on here!! Awesome job Smile
Schuster187 2/2/2018 1:37pm
2/2/2018 1:37pm
Mxrichart wrote:
Hello Schuster187, the frame protectors where did you buy them? Thank you.
I got these from Lightspeed

Pit Row

See All »
Schuster187 2/2/2018 1:37pm
2/2/2018 1:37pm
endo wrote:
Dude I think that is the best build I have EVER seen on here!! Awesome job Smile
Thanks, it was a lot of work! Glad you like it!
smashingpumpkins167 2/2/2018 3:27pm
2/2/2018 3:27pm Edited Date/Time 2/2/2018 3:28pm
That thing is beautiful. I'm working on a Pastrana replica of a different variety.

js451
Profile picture for user js451
Posts
579
Joined
10/23/2017
Location
AU
js451 9/27/2018 1:18am
9/27/2018 1:18am
Does anyone have the photos from this thread?
clint.barker.333 8/10/2020 1:30am
8/10/2020 1:30am
Schuster187 wrote:
Here are a few more photos of the bike: [img]https://p.vitalmx.com/photos/forums/2016/12/10/163629/s1200_unnamed_20.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2016/12/10/163630/s1200_unnamed_19.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2016/12/10/163631/s1200_unnamed_17.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2016/12/10/163632/s1200_unnamed_18.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2016/12/10/163633/s1200_unnamed_16.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2016/12/10/163634/s1200_unnamed_6.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2016/12/10/163635/s1200_unnamed_9.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2016/12/10/163636/s1200_unnamed_5.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2016/12/10/163637/s1200_unnamed_12.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2016/12/10/163638/s1200_unnamed_13.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2016/12/10/163639/s1200_unnamed_14.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2016/12/10/163640/s1200_unnamed_15.jpg[/img]
Here are a few more photos of the bike:

























Hey mate what colour is the frame doing one myself hoping it’s half as good as yours

Post a reply to: 2001 RM125 build - Pastrana Replica