Kx450f 2017 bar mounts with less than 5mm offset

JioFunny
Profile picture for user JioFunny
Posts
24
Joined
11/30/2015
Location
GR
JioFunny
Hi I bought renthal rubber bar mounts for fat handlebars, placed them in the front holes of my kx450f 2017 OEM upper clamps, tried both sides (turned them around) but I don't like neither position! I would like to have something at least almost in the middle of the two positions. Does anyone know a company that makes rubber bar mounts for oversized bars with less than 5mm offset that fits OEM upper clamps? No need for it to be 0 even 3mm would do. And I don't have a problem if they are a tiny bit taller than the renthal ones. I am looking for bar mounts instead of buying an aftermarket upper clamp with bar mounts that give a whole lot more positions because It's the fastest and cheapest way. Help would be greatly appreciated.
|
JioFunny
Profile picture for user JioFunny
Posts
24
Joined
11/30/2015
Location
GR
JioFunny 1/6/2017 11:42pm
1/6/2017 11:42pm Edited Date/Time 1/6/2017 11:44pm
After searching so much.. I did find rubber bar mounts with not only less offset but adjustable too and stock height!!.. Good quality too. They fit OEM upper clamps. It's these
http://www.zeta-racing.com/clamps/rx_2/index.html
I will order them today.
davidgrip
Profile picture for user davidgrip
Posts
273
Joined
10/7/2011
Location
Indianapolis, IN, USA
davidgrip 1/7/2017 7:47am
1/7/2017 7:47am
Renthal makes a 0 offset bar mount. I run the offset in the back, closest to rider, holes, with the short end of the mount back. In this position the bar is 5mm forward, about as close to a stock single mount as possible.

David
774 Chaplin Kawasaki
Factory Backing
Factory Seat
Acerbis
Dunlop
MX Engine Stand
Matrix Concepts
JioFunny
Profile picture for user JioFunny
Posts
24
Joined
11/30/2015
Location
GR
JioFunny 1/7/2017 9:04am
1/7/2017 9:04am
Renthal does not make 0mm offset bar mounts for kawasaki's (CL019) .. maybe in the past models but not anymore. I asked them directly through email and this was their reply:

The CL019 that fits late model Kawasaki's has a 5mm offset.  We do not offer a zero offset version.

Sincerely,

David Kaiser

Post a reply to: Kx450f 2017 bar mounts with less than 5mm offset