Where to get a revalve kit for work AER 48 forks

Kaiusive
Profile picture for user Kaiusive
Posts
40
Joined
10/18/2016
Location
IL US
Kaiusive
Where can I get a revalve kit for AER 48 Forks or who would you guys recommend me sending them to if I can get a revalve kit to do them myself.
|
Jeff_Crutcher 10/18/2016 7:38am
10/18/2016 7:38am
WP. I've had local and national suspension companies do my shit over the years, but you can't beat the original manufacturer. WP did my last ktm and it was the best I've ever had. I also paid full retail too.
Kaiusive
Profile picture for user Kaiusive
Posts
40
Joined
10/18/2016
Location
IL US
Kaiusive 10/18/2016 7:45am
10/18/2016 7:45am
Can I just order a revalve kit from then or will I have to send them in?
mx317
Profile picture for user mx317
Posts
5330
Joined
4/1/2008
Location
TN US
mx317 10/18/2016 8:01am
10/18/2016 8:01am
Enzo Racing
mxb2
Profile picture for user mxb2
Posts
22437
Joined
6/15/2010
Location
Bowie, MD US
mxb2 10/18/2016 8:14am
10/18/2016 8:14am
Kaiusive wrote:
Can I just order a revalve kit from then or will I have to send them in?
Maybe call them?

The Shop

See All »
2StrokenIt!
Profile picture for user 2StrokenIt!
Posts
34
Joined
9/3/2016
Location
Salt Lake City, UT US
2StrokenIt! 10/18/2016 8:24am
10/18/2016 8:24am
mx317 wrote:
Enzo Racing
Enzo Racing in Santa Ana Ca you will have to mail them.
FWYT
Profile picture for user FWYT
Posts
3551
Joined
5/25/2014
Location
San Diego, CA US
FWYT 10/18/2016 8:36am
10/18/2016 8:36am Edited Date/Time 10/18/2016 8:44am
Kaiusive wrote:
Where can I get a revalve kit for AER 48 Forks or who would you guys recommend me sending them to if I can get a...
Where can I get a revalve kit for AER 48 Forks or who would you guys recommend me sending them to if I can get a revalve kit to do them myself.
You don't really get a revalve "kit" per se, as there is no way to just put something together that works for all riders in all situations. You buy the shims and fluids, but the knowledge of how to put it together is another deal. You can learn to do it yourself if you have the desire and time. It's actually pretty fun. There is a massive thread on Thumpertalk somewhere. A little/lot confusing at first but it sinks in after a while.

Unless you're thinking of something like the Gold Valve kits and even, you install that "kit" and then stack the shims according to their chart for your situation. (Do they even make Gold Valve kits for those?)

Before dropping dime on sending your suspension out, spend some time playing clickers, pressures and fluid heights.



Kaiusive
Profile picture for user Kaiusive
Posts
40
Joined
10/18/2016
Location
IL US
Kaiusive 10/18/2016 8:58am
10/18/2016 8:58am Edited Date/Time 10/18/2016 9:05am
Kaiusive wrote:
Where can I get a revalve kit for AER 48 Forks or who would you guys recommend me sending them to if I can get a...
Where can I get a revalve kit for AER 48 Forks or who would you guys recommend me sending them to if I can get a revalve kit to do them myself.
FWYT wrote:
You don't really get a revalve "kit" per se, as there is no way to just put something together that works for all riders in all...
You don't really get a revalve "kit" per se, as there is no way to just put something together that works for all riders in all situations. You buy the shims and fluids, but the knowledge of how to put it together is another deal. You can learn to do it yourself if you have the desire and time. It's actually pretty fun. There is a massive thread on Thumpertalk somewhere. A little/lot confusing at first but it sinks in after a while.

Unless you're thinking of something like the Gold Valve kits and even, you install that "kit" and then stack the shims according to their chart for your situation. (Do they even make Gold Valve kits for those?)

Before dropping dime on sending your suspension out, spend some time playing clickers, pressures and fluid heights.



I know how to do it by myself just needing to know what to get exactly for my bike, I have the Ktm 250 sx-f factory edition but nothing online gives me a clear answer of what I need., I have my clickers all the way down as soft as it will go and it's still way to stiff for me, lowered the pressure down to about 105 in the left fork to but still really stiff unless landing really hard then it sorta bottoms out but anything else it is way to stiff but havnt messed with fluid hieghts yet
mx317
Profile picture for user mx317
Posts
5330
Joined
4/1/2008
Location
TN US
mx317 10/18/2016 9:09am
10/18/2016 9:09am
mx317 wrote:
Enzo Racing
2StrokenIt! wrote:
Enzo Racing in Santa Ana Ca you will have to mail them.
I use Craig Decker in Enzo's Texas location. He has been riding a KTM personally with the AER 48s since last year and has a very good setup. Email is cdecker47@hotmail.com
Kaiusive
Profile picture for user Kaiusive
Posts
40
Joined
10/18/2016
Location
IL US
Kaiusive 10/18/2016 9:32am
10/18/2016 9:32am
mx317 wrote:
Enzo Racing
2StrokenIt! wrote:
Enzo Racing in Santa Ana Ca you will have to mail them.
mx317 wrote:
I use Craig Decker in Enzo's Texas location. He has been riding a KTM personally with the AER 48s since last year and has a very...
I use Craig Decker in Enzo's Texas location. He has been riding a KTM personally with the AER 48s since last year and has a very good setup. Email is cdecker47@hotmail.com
Ok thank you I will check them out, how much is it for a full revalve from them?
Riesenberg448 10/18/2016 9:37am
10/18/2016 9:37am
We (Race Tech) have been revalving quite a few and also have a Spring Conversion System available for these forks.

The Gold Valve Kit is being put together from our R&D staff and should be available to dealers/centers/consumers shortly, but we can revalve in house already.

The Spring Conversion System is ready and available to dealers/centers/consumers already.

Sales@racetech.com and mention VitalMX for a special discount.
mx317
Profile picture for user mx317
Posts
5330
Joined
4/1/2008
Location
TN US
mx317 10/18/2016 9:43am
10/18/2016 9:43am
2StrokenIt! wrote:
Enzo Racing in Santa Ana Ca you will have to mail them.
mx317 wrote:
I use Craig Decker in Enzo's Texas location. He has been riding a KTM personally with the AER 48s since last year and has a very...
I use Craig Decker in Enzo's Texas location. He has been riding a KTM personally with the AER 48s since last year and has a very good setup. Email is cdecker47@hotmail.com
Kaiusive wrote:
Ok thank you I will check them out, how much is it for a full revalve from them?
Around $200 with oil plus any wear parts. What I like about Craig is he won't sell you things you don't need. I have sent new suspension to other places and they replaced parts like a set that had 50 hours on them.
Kaiusive
Profile picture for user Kaiusive
Posts
40
Joined
10/18/2016
Location
IL US
Kaiusive 10/18/2016 9:44am
10/18/2016 9:44am
Riesenberg448 wrote:
We (Race Tech) have been revalving quite a few and also have a Spring Conversion System available for these forks. The Gold Valve Kit is being...
We (Race Tech) have been revalving quite a few and also have a Spring Conversion System available for these forks.

The Gold Valve Kit is being put together from our R&D staff and should be available to dealers/centers/consumers shortly, but we can revalve in house already.

The Spring Conversion System is ready and available to dealers/centers/consumers already.

Sales@racetech.com and mention VitalMX for a special discount.
How much to send it in to you guys to do a revalve? And a rough estimate on when the gold valve kit will be released?
Kaiusive
Profile picture for user Kaiusive
Posts
40
Joined
10/18/2016
Location
IL US
Kaiusive 10/18/2016 9:45am
10/18/2016 9:45am
mx317 wrote:
I use Craig Decker in Enzo's Texas location. He has been riding a KTM personally with the AER 48s since last year and has a very...
I use Craig Decker in Enzo's Texas location. He has been riding a KTM personally with the AER 48s since last year and has a very good setup. Email is cdecker47@hotmail.com
Kaiusive wrote:
Ok thank you I will check them out, how much is it for a full revalve from them?
mx317 wrote:
Around $200 with oil plus any wear parts. What I like about Craig is he won't sell you things you don't need. I have sent new...
Around $200 with oil plus any wear parts. What I like about Craig is he won't sell you things you don't need. I have sent new suspension to other places and they replaced parts like a set that had 50 hours on them.
Thank you will defiantly be looking into that.
Riesenberg448 10/18/2016 9:49am
10/18/2016 9:49am
Riesenberg448 wrote:
We (Race Tech) have been revalving quite a few and also have a Spring Conversion System available for these forks. The Gold Valve Kit is being...
We (Race Tech) have been revalving quite a few and also have a Spring Conversion System available for these forks.

The Gold Valve Kit is being put together from our R&D staff and should be available to dealers/centers/consumers shortly, but we can revalve in house already.

The Spring Conversion System is ready and available to dealers/centers/consumers already.

Sales@racetech.com and mention VitalMX for a special discount.
Kaiusive wrote:
How much to send it in to you guys to do a revalve? And a rough estimate on when the gold valve kit will be released?
I'm actually traveling to see some family and a bit of personal time off this week, so I can't grab a quote; however, if you would like to drop an email to sales@racetech.com or give them a call at 951.279.6655 they will definitely put something together for you.

And I know the GV kit is in high demand for dealers/centers right now, so I'd guess within a couple of weeks it should be ready.
Kaiusive
Profile picture for user Kaiusive
Posts
40
Joined
10/18/2016
Location
IL US
Kaiusive 10/18/2016 9:51am
10/18/2016 9:51am
Thank you I will do that
Katoomey
Profile picture for user Katoomey
Posts
1714
Joined
1/18/2013
Location
WY US
Katoomey 10/18/2016 12:20pm
10/18/2016 12:20pm
Kaiusive wrote:
Where can I get a revalve kit for AER 48 Forks or who would you guys recommend me sending them to if I can get a...
Where can I get a revalve kit for AER 48 Forks or who would you guys recommend me sending them to if I can get a revalve kit to do them myself.
yes, buy a revalve kit and do them yourself. you seem like you know what you're doing....Dizzy

Post a reply to: Where to get a revalve kit for work AER 48 forks