Kx450f stalls

Mr.Sweden
Posts
17
Joined
8/15/2015
Location
Stockholm, SE
Edited Date/Time 2/10/2016 6:28pm
Hi

I Just finished the rebuild of my Kx450F -12 What i did was Striped it down to the frame clean and grease bearings and change the ones that was bad. All i did to the engine was a new piston and ned intake valves and camchain.

I checked the valve clearance twice and the timing.

Now i have put everything back together and when its warm it starts on the first kick and runs fine in neutrall but when you put 1st gear in it stalls really easy? If Im very sensitive on the gas/clutch i can get it roling but if i roll in idle speed in 1st and the hit it with gas it stalls on me??

If i run it with the choke out it works good but it revs a lot more.

So my guess is that it dosent get enough fule? Any other possible things that can fail or bee the reason?

Sorry for any misspelling hope you guys understand!
|
Paw Paw 271
Posts
3632
Joined
4/3/2013
Location
Benton, LA, USA
2/5/2016 11:28am
Dirty injector, weak fuel pump or plugged fuel filter screen at the pump. There is one other possibility and that is an air leak in the intake track or boot between the EFI body and the head.

Paw PAw
Jmcd1988
Posts
690
Joined
8/8/2015
Location
Brandon, FL, USA
2/5/2016 8:12pm
Is the idle to low?
holverson34
Posts
320
Joined
11/27/2014
Location
Carlton, OR, USA
2/8/2016 10:30am
I feel like mine stalls easy if it's not warmed up enough. Seems like pumping the clutch while I'm warming it up helps
Mr.Sweden
Posts
17
Joined
8/15/2015
Location
Stockholm, SE
2/9/2016 10:21am
Hi everyone!

I took the whole thorotle body appart and and cleaned everything one more time and now it runs perfectly

The Shop

2/10/2016 6:28pm
isnt that a great feeling!? good job.

Post a reply to: Kx450f stalls

The Latest