RM plastic

BEAZ
Profile picture for user BEAZ
Posts
3
Joined
8/7/2012
Location
Fayette, AL, USA
BEAZ
Edited Date/Time 11/29/2015 2:26pm
I noticed on Jordan Smith's Loretta's 125 that he had the new RMZ front #plate and front fender. Anyone know if these bolt up to the old 2strokes or is there mods required? Thanks
|
jarret.stephen 8/9/2012 6:48pm
8/9/2012 6:48pm
this could work on your stock clamps but u gotta drill the fender to make it work and it isnt too pretty underneath. however if you have 08-13 or 10-13 rmz clamps the bolt pattern will wok and it will fit perfectly. i did this to an 08 rmz250 with rmz 450 triple clamps and it looked pretty good. ALSO rockstar suzuki did this in 2010 to make their bikes look like the newer models but they were still carb bikes. good luck its a little pricy if you opt for th clamps but u might get lucky on ebay.
BEAZ
Profile picture for user BEAZ
Posts
3
Joined
8/7/2012
Location
Fayette, AL, USA
BEAZ 8/10/2012 7:19am
8/10/2012 7:19am
Sweet! thanks for the help. Just my luck their sold out of the cheap front fenders..
MXVet261
Profile picture for user MXVet261
Posts
743
Joined
4/1/2008
Location
Valley City, OH, USA
MXVet261 8/10/2012 8:27am
8/10/2012 8:27am Edited Date/Time 8/10/2012 8:27am
Yeah I posted that on a couple sites a while ago so it sold out quick.

The Shop

See All »
DTHA70
Profile picture for user DTHA70
Posts
336
Joined
9/25/2008
Location
Surprise, AZ, USA
DTHA70 8/13/2012 5:29pm
8/13/2012 5:29pm
ride engineering has triples for the RM that have mounting holes for both the RM and the newer RMZ front fenders, in red black and raw, and in 20mm and 22mm offset.
mxracer47y
Profile picture for user mxracer47y
Posts
117
Joined
7/5/2012
Location
Pittsfield, MA, USA
mxracer47y 9/1/2012 9:55am
9/1/2012 9:55am
yeah i just picked up a set of the ride engineering clamps and mounted the 2008 rmz 450 front fender and number plate heres some pics





dirtbikersa 9/6/2012 4:22am
9/6/2012 4:22am
Where did you get the clamps?
DTHA70
Profile picture for user DTHA70
Posts
336
Joined
9/25/2008
Location
Surprise, AZ, USA
DTHA70 9/10/2012 10:47pm
9/10/2012 10:47pm
mxracer47y wrote:
yeah i just picked up a set of the ride engineering clamps and mounted the 2008 rmz 450 front fender and number plate heres some pics...
yeah i just picked up a set of the ride engineering clamps and mounted the 2008 rmz 450 front fender and number plate heres some pics





which offset did you get? adrian recommended the 22mm offset. stock RM 250 offset is 21.5 but considering the Ride Engineering clamps are much more rigid the loss in offset is negligible
dbrunski125 11/29/2015 2:26pm
11/29/2015 2:26pm
mxracer47y wrote:
yeah i just picked up a set of the ride engineering clamps and mounted the 2008 rmz 450 front fender and number plate heres some pics...
yeah i just picked up a set of the ride engineering clamps and mounted the 2008 rmz 450 front fender and number plate heres some pics





Did you have any issues with the steering stops on the ride engineering clamps not mounting up 100%? The front end can over steer with the ride clamps can't it?

Post a reply to: RM plastic