Suzuki RM 125 | Leaking Carb |

Edited Date/Time 4/21/2012 4:13pm
After purchasing a 2003 rm125 second hand, I rode it a few times, I then noticed it was leaking premix out of the carb. Over a week there would be alot of premix on the garage floor, so I took it out and gave it to a friend, who cleaned it and put new screws on as he couldn't find anything wrong with it. I installed it last week and started fine, started it up today fine but bogged idle and died and would not start. I then found premix leaking out the exact same place, I've been told it could be the jetting but I havn't a clue how to do all that. Pictures below-





Thanks.
|
RMRider1
Posts
339
Joined
12/15/2011
Location
Syracuse, NY, USA
4/2/2012 8:10am
Bro, your bowl drain o-ring is leaking, ...replace
4/2/2012 8:20am
RMRider1 wrote:
Bro, your bowl drain o-ring is leaking, ...replace
Know where I can get one, can't find any sites in the UK.
scooter5002
Posts
4748
Joined
6/6/2010
Location
Nanton Alberta, CA
4/2/2012 11:08am
Not sure about how it works in Jolly Old but in the Great White North you can go to any quality bearing house or hydraulic shop an be able to get a replacement. That's not a "bike shop only" thing. Take the plug with you and the old O-ring as well. Easy peasy lemon squeezy.
BAMX
Posts
2906
Joined
1/22/2012
Location
Fallbrook, CA, USA
4/2/2012 11:37am
RMRider1 wrote:
Bro, your bowl drain o-ring is leaking, ...replace
Know where I can get one, can't find any sites in the UK.
Ebay has a ton of rebuild kits. I'm sure one of them will ship international. The kit has all of the jets orings and even a needle and seat.

The Shop

scooter5002
Posts
4748
Joined
6/6/2010
Location
Nanton Alberta, CA
4/3/2012 7:11am
Let's try this again shall we? Bloody ell, mate, read that bit 2 posts up. Some handy info right there. Yer carbys not sodded up,it just needs a fookin O-ring. U daft mate? Don't bother with a kit, YOU NEED THE FOOKIN O-RING!!! Blimey!
4/3/2012 7:35am
Let's try this again shall we? Bloody ell, mate, read that bit 2 posts up. Some handy info right there. Yer carbys not sodded up,it just...
Let's try this again shall we? Bloody ell, mate, read that bit 2 posts up. Some handy info right there. Yer carbys not sodded up,it just needs a fookin O-ring. U daft mate? Don't bother with a kit, YOU NEED THE FOOKIN O-RING!!! Blimey!
Calm down bro? Lol.

I was informed by a few people about a kit, that are highly known in mx...
Anyway, I rang Suzuki and ordered an o ring and float bowl gasket.
scooter5002
Posts
4748
Joined
6/6/2010
Location
Nanton Alberta, CA
4/3/2012 7:45am
Thought maybe you might struggle with English of the colonists. I translated for you. No need to wait and not ride if all you need is an O-ring. Pretty rare for that stuff to go bad. I let a bike sit 4 years and had NO issues with it. I drained the carb first before storing, however.
4/21/2012 12:24pm
Let's try this again shall we? Bloody ell, mate, read that bit 2 posts up. Some handy info right there. Yer carbys not sodded up,it just...
Let's try this again shall we? Bloody ell, mate, read that bit 2 posts up. Some handy info right there. Yer carbys not sodded up,it just needs a fookin O-ring. U daft mate? Don't bother with a kit, YOU NEED THE FOOKIN O-RING!!! Blimey!
lolLaughing
lumpy790
Posts
11872
Joined
9/18/2007
Location
York, SC, USA
4/21/2012 4:13pm
O rings are generic. Like was already mentioned.....Local auto parts store should have them

Post a reply to: Suzuki RM 125 | Leaking Carb |

The Latest