Best Power Washer?

Mod Killer
Posts
1827
Joined
4/1/2008
Location
Worldwide, CA, USA
7/3/2011 6:15pm
Void Main wrote:
I hate to reveal what I use because I don't want to jinx the good luck I have had with it but here is the one...
I hate to reveal what I use because I don't want to jinx the good luck I have had with it but here is the one I have been using for about the last 5 years:

http://www.overstock.com/Home-Garden/Karcher-K-3.98-1750-PSI-Electric-P…



I believe I bought it at Walmart but cannot remember for sure. I have burned up the pumps on a couple of gas models and then went cheap and bought this one. So far it's the best one I've ever had. Although it is a lower end model it has washed many bikes, probably about a dozen deck washings and I've power washed the side of the house (vinyl) a half dozen times. It works as good today as it did when I bought it. I assume I have just been lucky on this one.
my old roommate had one similar to this. the pressure on it was pretty poor. couldnt get the white plastics clean.

im gonna go check out costco and kragen right now.


whats an ample PSI? i prefer it on the stronger side. i keep up on my regular maintenance of the bike so im not too worried about the bearings getting fucked up.
CamP
Posts
6826
Joined
8/16/2006
Location
Colleyville, TX, USA
7/3/2011 6:35pm Edited Date/Time 7/3/2011 6:37pm
Mod Killer wrote:
my old roommate had one similar to this. the pressure on it was pretty poor. couldnt get the white plastics clean. im gonna go check out...
my old roommate had one similar to this. the pressure on it was pretty poor. couldnt get the white plastics clean.

im gonna go check out costco and kragen right now.


whats an ample PSI? i prefer it on the stronger side. i keep up on my regular maintenance of the bike so im not too worried about the bearings getting fucked up.
I've been very happy with the 2,200psi from my Briggs & Stratton powered Brute 2200. Considering that it's made in the US, it's only $230 at Walmart and it's lasted 10 years, the return on the investment has been good. Way better than some disposable Chinese electric junk that costs almost as much and craps out every two years.
Void Main
Posts
17013
Joined
3/19/2008
Location
USA
7/3/2011 6:53pm
I think that's the one I had that the pump went out on right away. The B&S ran great though. Smile
V
Posts
78
Joined
6/19/2011
Location
DE
7/3/2011 6:59pm
The best pressure washers to get are belt driven pressure washers. They last longer, give better performance in both psi and gpm, and you won't have the problems you get with the cheaper models.

The Shop

skidsteer16
Posts
2125
Joined
4/1/2008
Location
Lakewood, CO, USA
7/3/2011 7:07pm Edited Date/Time 7/3/2011 7:10pm
V wrote:
The best pressure washers to get are belt driven pressure washers. They last longer, give better performance in both psi and gpm, and you won't have...
The best pressure washers to get are belt driven pressure washers. They last longer, give better performance in both psi and gpm, and you won't have the problems you get with the cheaper models.
I don't think he's looking for a 4000 psi commercial unit Smile
newmann
Posts
24437
Joined
4/1/2008
Location
USA
7/3/2011 7:11pm
V wrote:
The best pressure washers to get are belt driven pressure washers. They last longer, give better performance in both psi and gpm, and you won't have...
The best pressure washers to get are belt driven pressure washers. They last longer, give better performance in both psi and gpm, and you won't have the problems you get with the cheaper models.
I don't think he's looking for a 4000 psi commercial unit Smile
But if you are, I've been cooking one of these natural gas fired Landa's for over ten years five days a week. Great machine.

http://www.landa.com/ViewCategories_Template3.aspx?Pid=1038


V
Posts
78
Joined
6/19/2011
Location
DE
7/3/2011 7:15pm Edited Date/Time 7/3/2011 7:16pm
V wrote:
The best pressure washers to get are belt driven pressure washers. They last longer, give better performance in both psi and gpm, and you won't have...
The best pressure washers to get are belt driven pressure washers. They last longer, give better performance in both psi and gpm, and you won't have the problems you get with the cheaper models.
I don't think he's looking for a 4000 psi commercial unit Smile
There are viable belt driven pressure washers such as the Mi-T-M Pressure Washer Cold Water-Belt Drive 3000 PSI. Spending around $1500.00 is worth the investment since belt driven pressure washers last longer and can perform a variety of duties, in my opinion. For just cleaning a bike once a week, you are correct. No need for a commercial unit.
MOTODAD422
Posts
429
Joined
9/26/2008
Location
Easton, PA, USA
7/3/2011 7:34pm
I have a craftsman,it is really small and works great i think it was like $160.00,had it for 8 years so far. 2150.00 psi, perfect for bikes. The trick to making them last is to not let the engine run when you are not spraying,the unit goes into pressure relief and bypass mode and makes the pump get real hot.
STBY
Posts
50
Joined
4/1/2008
Location
Eatonville, WA, USA
7/3/2011 10:39pm
I own a fleet washing business, so here is my 2 cents...

You can spend a ton of dough for a washer but you really don't need to. Just buy a cheap gas washer and replace the tip with a larger gallon per minute tip, you don't need a ton of pressure to clean. You want volume, if it is a 2.2 gal per minute pump put a 4 gal tip on it. The larger tip will reduce pressure but will use more water which will clean better and is much easier on the pump, it will last a very long time. Don't let the washer idle for long periods of time, it is hard on the pump. If the washer is running you should have water flowing through the pump.
ocscottie
Posts
69092
Joined
8/16/2006
Location
Redding, CA, USA
11/22/2011 5:40am
fucking spammer bumping old posts.

Sorry guys.
11/22/2011 8:18am
STBY wrote:
I own a fleet washing business, so here is my 2 cents... You can spend a ton of dough for a washer but you really don't...
I own a fleet washing business, so here is my 2 cents...

You can spend a ton of dough for a washer but you really don't need to. Just buy a cheap gas washer and replace the tip with a larger gallon per minute tip, you don't need a ton of pressure to clean. You want volume, if it is a 2.2 gal per minute pump put a 4 gal tip on it. The larger tip will reduce pressure but will use more water which will clean better and is much easier on the pump, it will last a very long time. Don't let the washer idle for long periods of time, it is hard on the pump. If the washer is running you should have water flowing through the pump.
You probably hit the nail on the head as for problems. Do all you spraying, if you need to stop and scrub shut it off. Sitting and idling or starting prior to running water through them is not good.

I like to start and let any engine idle and warm up and have to remind myself not to do it with the washer. I have a $200 Harbor Freight 2500psi gasser that starts every time, had it for 4 or 5 years I think.
mxtech1
Posts
1968
Joined
7/21/2011
Location
Galesburg, IL, USA
11/22/2011 8:58am
My father has been using a Troy Built unit with a Honda engine for 7 years now. It still runs great. It gets used on a wide variety of things from bike washing to deck cleaning to tractor/farm cleaning. Yearly oil changes in the engine has kept it in top shape. The only problem he has ever had is one winter it got too cold and some seals were damaged in the pump. The good thing about a name brand unit like this is that most lawnmower service shops carry or can special order parts in.

I think he paid around $300 for it. I bought myself the same one two years ago and it has worked flawlessly.

One thing to note about the gas units is most of them have a built in check valve in the water inlet of the pump. This check valve is forced open by the pressure of a garden hose. In order to run these gas units off of a small water tank (like the ones at the track) with no external pressure pump, the pump on the washer must be taken apart and the check valve removed in order for the gravity flowing water to come in. I've seen many people burn up pumps because they can't figure out why the water won't flow through the pump. Before they realize what's going on the pump has been burned up.
nc_mx_kid
Posts
1485
Joined
3/6/2007
Location
Team Charlotte Motorsports, NC, USA
11/22/2011 1:55pm
I got an karcher electric for around $100 and its worked great for 2years. Just took a crap lastweek, think the motor burned up... Well worth the money, I was happy w/ it. Now time to get another one(dam I hate spending money)
motoracer633
Posts
427
Joined
11/14/2011
Location
North Charleston, SC, USA
11/22/2011 2:04pm
fcr wrote:
I just bought a Rigid 3000psi from Home Depot. Has the Subaru engine and a Cat pump/ rebuildable. Been looking at them for awhile now and...
I just bought a Rigid 3000psi from Home Depot. Has the Subaru engine and a Cat pump/ rebuildable. Been looking at them for awhile now and it will do what I need. I wanted a Honda engine but couldn't find many different brands around me that fit the bill. So far it has worked very well for me. Since you are in OC you will be able to find a better selection.
My 1600 Husky electric works great for bike washing and wasn't expensive, It is going on about 8-10 years too. I hate the inflexible hose though.
my brother has a ridgid gas model that he uses to clean houses before he paints and i have to be careful around good sticker kits! its strong and its never had any problems. i think its 2 yrs old and gets used quite a bit for hours on end.
bigborefan
Posts
1472
Joined
3/8/2008
Location
Urbana, IL, USA
11/22/2011 4:00pm Edited Date/Time 11/22/2011 4:36pm
I have had both an electric and a gas Karcher. The electric had plenty of pressure, but it didn't flow enough water. I have the gas model now, flows 2 gallons a minute I think. I prefer the gas model myself.

Good tip on don't let it idle. My buddy broke mine letting it idle. I never knew about a higher flowing tip.

Post a reply to: Best Power Washer?

The Latest