Posts
18
Joined
3/29/2018
Location
Saint Michael, MN
US
TeamGripItAndRipIt
5/25/2023 11:00am
5/25/2023 11:00am
rebuilt about 5hrs ago, 2nd wash since rebuild. Took a bit to start but finally popped off after the wash ran like shit and died after 20 secs or so. sat for a week, finally had time to dig in and there is no spark now. Changed plug, swapped CDI and coil with another bike and not the issue. bikes wifi is also not working and the map switch button wont light up. Any help would be great! Asked Keffer, he refereed me to his mechanic and haven't heard from him yet.
Thank you
Take all connections apart and clean w contact cleaner take output reading of stator and inspect pick up
Anyone else got idea's? stator is good, cleaned all connections. still nothing
Disconnect the kill switch.
sounds like maybe water in a connection or maybe bad ground?
we have tried disconnecting the kill switch, also took apart and cleaned the kill switch. ill have to track down the grounds and check them. thanks
Post a reply to: 2019 yz250f No Spark