Rm 125 2007 footpegs

Jeff17
Profile picture for user Jeff17
Posts
2
Joined
6/2/2021
Location
BE
Jeff17
Edited Date/Time 6/4/2021 4:00pm
Hello,
There are no aftermarket footpeg for an rm 125 07.
Ive heard ktm sx 125 footpeg could fit.
Can anyone confirm?
Thx!
|
Rickyisms
Profile picture for user Rickyisms
Posts
4833
Joined
10/5/2017
Location
FL US
Rickyisms 6/2/2021 10:21am
6/2/2021 10:21am
I believe the older 2015 and back KTM footpegs work with slight modification.
1
DuroTools
Profile picture for user DuroTools
Posts
757
Joined
9/9/2015
Location
Middletown, CT US
DuroTools 6/4/2021 1:24pm
6/4/2021 1:24pm
I have a cool pair of used titanium footpegs from a parted out 1st generation RMZ 250 but I had to make spacers to go inside the springs for them to fit correctly so I always wondered if they were for meant for an RM instead and it was just a listing mistake on ebay. Send me pics and measurements and I'll try to see if they will fit if interested. I'll also reply with pics if interested
Bruce372
Profile picture for user Bruce372
Posts
6338
Joined
4/1/2008
Location
US
Bruce372 6/4/2021 4:00pm
6/4/2021 4:00pm
I ran 2015 and up pegs on my last gen rm125, you have to file the stoppers slightly to get then to drop to the appropriate level. Just take your time and do it slowly, they should actually point up slightly... if you run then horizontal, you'll find yourself slipping off.

Post a reply to: Rm 125 2007 footpegs