KTM bolts

Rickyisms
A while ago I had a list from a fellow Vital member who was kind enough to share a list of each size bolt for the 16-18 KTMs to replace with Ti or similar. Does anyone recall this list or the member who had it? I wanna say he owned a 250SX.
|
GoggleFiend904 5/7/2020 7:52pm
5/7/2020 7:52pm
I’d guess it was langham or joe carlino. I imagine they will drop in here eventually
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7518
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
CarlinoJoeVideo 5/7/2020 8:56pm
5/7/2020 8:56pm
I remember seeing it, but can’t remember who posted it.
chasestevenson599 5/8/2020 6:22am
5/8/2020 6:22am
I saved it, here you go!

Front Brake Caliper- M8x30 (2)
Fork Pinch M8x25 (4)
Bar clamp M8x25 (4)
Triple Clamps M8x40 (4) & M8x50 (4)
Fork Guards M6x12 (6)
Rotor Bolts M6x13 (12)
Front Fender M6x16 (4)
Front Plate M6x10 (1)
Hand Brake clamp M6x25 (4)
Frame guard M5x12 (5)
Exhaust M6x35 (1) & M8x35 (1)
Rear Brake pedal tip M5x10 (2)
Sprockets M8x26 (6) & M8 nut (6)
Shock Bolt M10x52 (2)
Seat Bolt M6x25 (2)
Chain guide M8x30 (2) & M6x40 (1)
Sub frame M8x18 (2)
Motor Mount M8x20 (6)
Chain slide M6x13 (2)

Clutch Cover
M6x45 (3)
M6x25 (6)
M6x20 (2)

Ignition Cover
M6x30 (8)

Water Pump
M6x25 (2) M6x45 (2)

M5x10 (2)
M5x12 (5)
M6x10 (1)
M6x12 (6)
M6x13 (14) Rotor
M6x16 (4)
M6x20 (2)
M6x25 (14)
M6x30 (8)
M6x35 (1)
M6x40 (1)
M6x45 (5)
M8x18 (2)
M8x20 (6)
M8x25 (8)
M8x30 (4)
M8x35 (1)
M8x40 (4)
M8x50 (4)
M10x50 (2)
Sprockets M8x26 (6) & M8 nut (6)
RUBBER BAR CLAMP DUCATI
https://www.ducatiomaha.com/products/74110131a
9
Rickyisms 5/8/2020 9:07am
5/8/2020 9:07am
chasestevenson599 wrote:
I saved it, here you go! Front Brake Caliper- M8x30 (2) Fork Pinch M8x25 (4) Bar clamp M8x25 (4) Triple Clamps M8x40 (4) & M8x50 (4)...
I saved it, here you go!

Front Brake Caliper- M8x30 (2)
Fork Pinch M8x25 (4)
Bar clamp M8x25 (4)
Triple Clamps M8x40 (4) & M8x50 (4)
Fork Guards M6x12 (6)
Rotor Bolts M6x13 (12)
Front Fender M6x16 (4)
Front Plate M6x10 (1)
Hand Brake clamp M6x25 (4)
Frame guard M5x12 (5)
Exhaust M6x35 (1) & M8x35 (1)
Rear Brake pedal tip M5x10 (2)
Sprockets M8x26 (6) & M8 nut (6)
Shock Bolt M10x52 (2)
Seat Bolt M6x25 (2)
Chain guide M8x30 (2) & M6x40 (1)
Sub frame M8x18 (2)
Motor Mount M8x20 (6)
Chain slide M6x13 (2)

Clutch Cover
M6x45 (3)
M6x25 (6)
M6x20 (2)

Ignition Cover
M6x30 (8)

Water Pump
M6x25 (2) M6x45 (2)

M5x10 (2)
M5x12 (5)
M6x10 (1)
M6x12 (6)
M6x13 (14) Rotor
M6x16 (4)
M6x20 (2)
M6x25 (14)
M6x30 (8)
M6x35 (1)
M6x40 (1)
M6x45 (5)
M8x18 (2)
M8x20 (6)
M8x25 (8)
M8x30 (4)
M8x35 (1)
M8x40 (4)
M8x50 (4)
M10x50 (2)
Sprockets M8x26 (6) & M8 nut (6)
RUBBER BAR CLAMP DUCATI
https://www.ducatiomaha.com/products/74110131a
Thanks a ton my man.
1

The Shop

See All »
YZed250
Profile picture for user YZed250
Posts
1318
Joined
11/9/2014
Location
Costa Mesa, CA US
YZed250 5/8/2020 12:22pm
5/8/2020 12:22pm Edited Date/Time 5/8/2020 12:22pm
Does anyone have an alternative supplier than Ducati on those rubber ties?
I'd like to buy 10-20 if anyone wants to sell me some 'in bulk'.
Rickyisms 5/8/2020 3:13pm
5/8/2020 3:13pm
chasestevenson599 wrote:
I saved it, here you go! Front Brake Caliper- M8x30 (2) Fork Pinch M8x25 (4) Bar clamp M8x25 (4) Triple Clamps M8x40 (4) & M8x50 (4)...
I saved it, here you go!

Front Brake Caliper- M8x30 (2)
Fork Pinch M8x25 (4)
Bar clamp M8x25 (4)
Triple Clamps M8x40 (4) & M8x50 (4)
Fork Guards M6x12 (6)
Rotor Bolts M6x13 (12)
Front Fender M6x16 (4)
Front Plate M6x10 (1)
Hand Brake clamp M6x25 (4)
Frame guard M5x12 (5)
Exhaust M6x35 (1) & M8x35 (1)
Rear Brake pedal tip M5x10 (2)
Sprockets M8x26 (6) & M8 nut (6)
Shock Bolt M10x52 (2)
Seat Bolt M6x25 (2)
Chain guide M8x30 (2) & M6x40 (1)
Sub frame M8x18 (2)
Motor Mount M8x20 (6)
Chain slide M6x13 (2)

Clutch Cover
M6x45 (3)
M6x25 (6)
M6x20 (2)

Ignition Cover
M6x30 (8)

Water Pump
M6x25 (2) M6x45 (2)

M5x10 (2)
M5x12 (5)
M6x10 (1)
M6x12 (6)
M6x13 (14) Rotor
M6x16 (4)
M6x20 (2)
M6x25 (14)
M6x30 (8)
M6x35 (1)
M6x40 (1)
M6x45 (5)
M8x18 (2)
M8x20 (6)
M8x25 (8)
M8x30 (4)
M8x35 (1)
M8x40 (4)
M8x50 (4)
M10x50 (2)
Sprockets M8x26 (6) & M8 nut (6)
RUBBER BAR CLAMP DUCATI
https://www.ducatiomaha.com/products/74110131a
Is the bottom just an overview of all the bolts needed?
chasestevenson599 5/11/2020 7:16am
5/11/2020 7:16am
Rickyisms wrote:
Is the bottom just an overview of all the bolts needed?
I really don't remember to be honest. I think I just copied and pasted the original.
bvm111
Profile picture for user bvm111
Posts
10084
Joined
7/1/2008
Location
Las Vegas, NV US
bvm111 12/6/2020 6:31am
12/6/2020 6:31am
Anyone know the thread pitch of the M5 Frame guard bolts... it isn’t .8 or .5! my right one somehow got a little buggered up and i am so careful when i install them!
Yeti831
Profile picture for user Yeti831
Posts
1348
Joined
1/30/2020
Location
UT US
Yeti831 12/6/2020 6:55am
12/6/2020 6:55am
I know this isn’t giving you a direct answer but Fastenal has thread pitch gauges and plastic cards for bolt diameters and bolt length marks on the side. They are now permanent additions to my tool box.

Worst case, snag those and measure out what you want to replace.

Post a reply to: KTM bolts