2019 YZ250F Map Switch

Vet57
Profile picture for user Vet57
Posts
2530
Joined
12/13/2010
Location
BRO Town, MA, USA
Vet57
Manual is vague on this..I have uploaded another map for the bike. First time riding it yesterday when depressing the switch the blue light remains on..is this normal? Also when I returned home after unloading the bike the blue light was still lit until I hit it again. Somebody shed some light on this please?
|
Lynch
Profile picture for user Lynch
Posts
728
Joined
3/14/2015
Location
SE
Lynch 5/27/2019 6:20am
5/27/2019 6:20am Edited Date/Time 5/30/2019 4:57am
99,9% sure when the light is on Map 2 is being used.
huutnanny
Profile picture for user huutnanny
Posts
83
Joined
4/21/2019
Location
San Francisco, CA, USA
huutnanny 5/30/2019 4:47am
5/30/2019 4:47am
Blue light is the 2nd map. It stays that map until you press it again.
Sofo
Profile picture for user Sofo
Posts
1
Joined
6/3/2019
Location
AU
Sofo 6/3/2019 3:38am
6/3/2019 3:38am
you need to disconnect your wifi on your phone to your yamaha power tuner app, then the blue light will turn off once the bike is not in use
sesker15
Profile picture for user sesker15
Posts
1054
Joined
4/14/2008
Location
Upper Marlboro, MD, USA
sesker15 6/3/2019 5:38am
6/3/2019 5:38am
Does anyone know how to get the stock map back on after you already have maps on 1 and 2?

The Shop

See All »
huutnanny
Profile picture for user huutnanny
Posts
83
Joined
4/21/2019
Location
San Francisco, CA, USA
huutnanny 6/3/2019 10:05am
6/3/2019 10:05am
Stock map is all zeros.
sesker15
Profile picture for user sesker15
Posts
1054
Joined
4/14/2008
Location
Upper Marlboro, MD, USA
sesker15 6/3/2019 12:49pm
6/3/2019 12:49pm
huutnanny wrote:
Stock map is all zeros.
Thanks. DUHHH LOL. What a brain fart on my end. Thanks for the help.
jacob2328
Profile picture for user jacob2328
Posts
3
Joined
10/19/2019
Location
Roggen, CO, USA
jacob2328 10/19/2019 5:52pm
10/19/2019 5:52pm
Vet57 wrote:
Manual is vague on this..I have uploaded another map for the bike. First time riding it yesterday when depressing the switch the blue light remains on..is...
Manual is vague on this..I have uploaded another map for the bike. First time riding it yesterday when depressing the switch the blue light remains on..is this normal? Also when I returned home after unloading the bike the blue light was still lit until I hit it again. Somebody shed some light on this please?
I have a 2019 yz 250f and when I start up my bike the blue button ( map switch) automatically comes on and I can’t turn it off. Sometimes the blue button doesn’t light up and when I click the button it stays grey. When I click it, it should glow blue for map 2. Anyone know what the problem is ? Please help
grimsypro 10/20/2019 6:34am
10/20/2019 6:34am
Map 2 is on when the blue lights on and map 1 when theres no light If you have it in map 2 when you turn it off then next start up will be in map 2.
jacob2328
Profile picture for user jacob2328
Posts
3
Joined
10/19/2019
Location
Roggen, CO, USA
jacob2328 10/20/2019 8:35am
10/20/2019 8:35am
grimsypro wrote:
Map 2 is on when the blue lights on and map 1 when theres no light If you have it in map 2 when you turn...
Map 2 is on when the blue lights on and map 1 when theres no light If you have it in map 2 when you turn it off then next start up will be in map 2.
Yeah I know. But it wasn’t like that before. When I turn on the bike the map switch button stays grey like it should. If I wanted to turn map 2 on I should be able to just click the button and blue light will turn on. But that’s not case. It doesn’t turn on. Pressed it multiple times. When I start the bike the blue like automatically turns on and I can’t turn it off. When I click it, it stays blue.
jacob2328
Profile picture for user jacob2328
Posts
3
Joined
10/19/2019
Location
Roggen, CO, USA
jacob2328 10/20/2019 8:39am
10/20/2019 8:39am
grimsypro wrote:
Map 2 is on when the blue lights on and map 1 when theres no light If you have it in map 2 when you turn...
Map 2 is on when the blue lights on and map 1 when theres no light If you have it in map 2 when you turn it off then next start up will be in map 2.
And if ur in map 2 where the blue light is on and you turn off the bike it will stay on map 2 for about 30 sec or a minute and the bike will completely shut off taking you to map 1. If you wanted map 2 back on start it and click the button and bam you’re in map 2. But my button either stays blue for the 30 sec and when the bike shuts off it goes grey cause it’s off but when I start it, it goes back on blue (map 2) and that’s not how it should go. Wasn’t like that ever.
rsvmickey
Profile picture for user rsvmickey
Posts
2
Joined
3/11/2020
Location
Carrollton, TX, USA
rsvmickey 3/11/2020 7:59pm
3/11/2020 7:59pm
I noticed that the rpm values at the bottom of the TP map is different than the values I can input. mine goes from 2000 to 10000 on manually created ones. The stock uneatable maps go from 5000 to 12000. Trying to duplicate the TP map doesn't seem possible. The one I found on line for the 2019 goes from 4500 to 13000 which even further confuses. Any ideas? Check yours. 2000 to 10000?
Lynch
Profile picture for user Lynch
Posts
728
Joined
3/14/2015
Location
SE
Lynch 3/11/2020 10:38pm
3/11/2020 10:38pm
rsvmickey wrote:
I noticed that the rpm values at the bottom of the TP map is different than the values I can input. mine goes from 2000 to...
I noticed that the rpm values at the bottom of the TP map is different than the values I can input. mine goes from 2000 to 10000 on manually created ones. The stock uneatable maps go from 5000 to 12000. Trying to duplicate the TP map doesn't seem possible. The one I found on line for the 2019 goes from 4500 to 13000 which even further confuses. Any ideas? Check yours. 2000 to 10000?
You can change them but you need to start and adjust the highest to allow the rest of them to be raised

Post a reply to: 2019 YZ250F Map Switch