Banshee rebuild

GarnerWilson
Profile picture for user GarnerWilson
Posts
22
Joined
4/7/2013
Location
Grand Bay, AL US
GarnerWilson
Edited Date/Time 7/28/2015 5:49pm
Hey folks, I know this is more of a motocross forum, but I need a little advice on a banshee rebuild. I'm rebuilding my friends 00' banshee and I'm having the cylinders bored 25mm over which would make it 64.25mm. Should I get bigger carbs as well? Or what. He just joy rides, but wants more power.
|
Paw Paw 271
Profile picture for user Paw Paw 271
Posts
3640
Joined
4/3/2013
Location
Benton, LA US
Paw Paw 271 7/27/2015 10:28am
7/27/2015 10:28am
Stock carbs should be fine. Just keep an eye on the jetting.

Paw Paw
Falcon
Profile picture for user Falcon
Posts
10830
Joined
11/16/2011
Location
Menifee, CA US
Fantasy
407th
Falcon 7/28/2015 5:22pm
7/28/2015 5:22pm
Those things are really sensitive to jetting; I second what PawPaw says about keeping the stock carbs. Also, make sure the carbs are synced or it will run like crap.
reded
Profile picture for user reded
Posts
3685
Joined
3/26/2011
Location
KS US
reded 7/28/2015 5:49pm
7/28/2015 5:49pm Edited Date/Time 7/28/2015 5:50pm
Use the stockers and eliminate the TORS if it hasn't been done already. You dont have to get all technical with the carb sync, just make sure both slides move at the same time off idle. Search the google, there's plenty of info out there on Banshees with stock carbs.

Post a reply to: Banshee rebuild