2003 YZ250 full rebuild

Related:
Create New Tag

6/25/2018 9:34 PM
Edited Date/Time: 6/25/2018 9:37 PM

Bought this thing almost two years ago for $2000, threw the 2015 plastic restyle kit and rode it here and there. Went to check it over the other day and I guess a seal or gasket went bad... coolant and oil mixed together in the engine...


Guess I’m gonna rebuild the whole thing.

Anyone know any reputable engine builders, suspension companies, powdercoaters (for the frame), and anyone that does anodizing (for the swingarm) near Delaware?!

Probably going to get the hubs and triple clamps cerakoted as well. Anyone local to my area know a good place to go for that?

Photo



Photo


Photo
Photo
Photo

|

6/26/2018 12:31 PM

the water in the oil is caused by bad waterpump seals can be fixed by removing the clutch side cover and replacing them

|

6/26/2018 7:05 PM

Kianio7 wrote:

the water in the oil is caused by bad waterpump seals can be fixed by removing the clutch side cover and replacing them

Yeah I know, but it’s about due for a full top and bottom end rebuild so I said screw it... ??‍♂️

|