Vital MX Pit Bits: 2026 Fox Raceway National 4

Get your latest fix of Pit Bits from the opening round of the 2026 Pro Motocross season at Fox Raceway

ML512
6/3/2026 2:33pm
foxracewayA
PitBits FoxRaceway 2026 ProMotocross-103
It's the first round of Pro Motocross, LET'S GO!
PitBits FoxRaceway 2026 ProMotocross-099.jpg?VersionId=ZG5.YP1X9HCJ0lmgiLV
Star Racing's 250 riders were a little all over the place on the front end of their bikes. While all their guys run PSF1 air forks indoors, in outdoors a few go to spring forks, like Thrasher here.
PitBits FoxRaceway 2026 ProMotocross-098
Max Anstie chose to stick it out with air forks.
PitBits FoxRaceway 2026 ProMotocross-065
While Davies went to spring forks and switched from X-Trig ROCS Pro clamps to ROCS Tech clamps. What's the difference? The pro clamp uses an adjustable stem that bolts into the lower clamp, while the Tech uses the OEM-style stem pressed in. Yes, it creates a feel difference.
PitBits FoxRaceway 2026 ProMotocross-081
Jett is back, back again.
PitBits FoxRaceway 2026 ProMotocross-087
Chase Sexton's Monster Energy Kawasaki KX450SR had a few changes for Pro Motocross.
PitBits FoxRaceway 2026 ProMotocross-114.jpg?VersionId=diyP6Xuy9wzwYWmsBtJ6KurREO8RL
The most notable was the move to a set of production Showa forks from a stock KX450. What makes them different than the works Showa units he was on? The production one uses a 25mm cartridge instead of a 27mm cartridge in the works set. Also, the upper tubes have a smaller clamping diameter at the top of the fork, using a smaller ID triple clamp bore to hold it. The works fork is bigger in diameter right at the top, with the taper to that point being different (different flex character).
PitBits FoxRaceway 2026 ProMotocross-093
A look at Garrett's works forks.
PitBits FoxRaceway 2026 ProMotocross-088.jpg?VersionId=KWg1EoQyWOwbDccF82I0OLTsTU8cu7e
Sexton's forks also use the production lower legs (no coatings) and stock cast lugs. He also arrived at the opening round with aftermarket hubs and spokes (Haan hubs, with a different gauging of spokes via Dubya USA) but still tied to DID rims. 
PitBits FoxRaceway 2026 ProMotocross-161.jpg?VersionId=VeAIJZOTz5ooAeybOfo8dDp0stG
Marchbanks was still using works forks with billet lugs and the works KHI magnesium hubs.
PitBits FoxRaceway 2026 ProMotocross-076
The Red Bull Troy Lee Designs Ducati team also utilizes the stock 25mm cartridges in their Showa forks.
PitBits FoxRaceway 2026 ProMotocross-052
Ferrandis had a standard tank but Barcia had an oversized carbon fuel tank. We all know Barcia loves to rev it.
PitBits FoxRaceway 2026 ProMotocross-074
Haiden Deegan arrived at Fox Raceway with spring forks and stock upper triple clamps aboard his Monster Energy Yamaha Star Racing YZ450F.
PitBits FoxRaceway 2026 ProMotocross-073
All the Triumph guys were on spring forks for the opening round, after there was some back-and-forth in Supercross between KYB PSF1 air forks and spring.
PitBits FoxRaceway 2026 ProMotocross-072.jpg?VersionId=JMtzelqUZ5IU2MCwexomx.Yd
Jorge Prado returned to WP's works air fork, which we believe he ran in his last season of MXGP.
PitBits FoxRaceway 2026 ProMotocross-068.jpg?VersionId=B2fyTl7PFIsMfX9BsIgNrKStHB7
Some of the Husky 250 boys were on WP air forks as well.
PitBits FoxRaceway 2026 ProMotocross-046.jpg?VersionId=qz.oHeHk7YIyJqmAVFIH9oUn28JB
Chance Hymas' machine had a works 27mm cartridge Showa fork with an air assist option, which he's been on all year.
PitBits FoxRaceway 2026 ProMotocross-047.jpg?VersionId=4kx8mCsq
After running the production 25mm cartridge from a Works Edition CRF450R for most of Supercross, the Lawrences (namely Hunter) went back to a 27mm works cartridge for Pro Motocross. If you peek at the compression adjuster, you'll see a small adjuster inside that. One controls compression adjustment, while the other is pressure spring preload.
PitBits FoxRaceway 2026 ProMotocross-036
Jo Shimoda jumped ship from the 27mm works cartridge he used in Supercross, taking over the 25 WE cartridges from Hunter. They've added a schrader valve in place of the air bleed screw, as Shimoda commonly runs a small amount of PSI in his fork as air assist.
PitBits FoxRaceway 2026 ProMotocross-001.jpg?VersionId=4fTSCJZT01giqVyykWKrLtxpWB8fnLS
Speaking of the HRC Honda Progressive machines, here's their new look via SKDA. This was brought out as Honda moves towards the red, blue, and white theme of their 2027 off-road model lineup
PitBits FoxRaceway 2026 ProMotocross-003
A cleaner, more tasteful look than the MXGP bikes.
PitBits FoxRaceway 2026 ProMotocross-002.jpg?VersionId=KHguy3u4YJ7ZOH6rNgUz4lxmqyyLWH
The RS-12 EVO, a new exhaust from Yoshimura that we'll get into next weekend.
PitBits FoxRaceway 2026 ProMotocross-039
#1
PitBits FoxRaceway 2026 ProMotocross-040.jpg?VersionId=5MiCvB4YR.v.IlBAe2qpb P4Bdt
Yup, don't forget, Jett Lawrence was our 2025 Pro Motocross 450 champion.
PitBits FoxRaceway 2026 ProMotocross-041
Jett Lawrence's Team Honda HRC Progressive CRF450R Works Edition.
PitBits FoxRaceway 2026 ProMotocross-043
Like last season, Jett and Hunter's bike features a stock 16mm shock shaft for Pro Motocross.
PitBits FoxRaceway 2026 ProMotocross-013
They also have stock linkages onboard (the 250s of Hymas and Shimoda have works linkages).
PitBits FoxRaceway 2026 ProMotocross-014
Interestingly, the Lawrence's machines feature the big compression adjuster works shock, which were developed around a 20mm shock shaft.
PitBits FoxRaceway 2026 ProMotocross-034.jpg?VersionId=ZHOFUDpNGiY4ZP
Jo Shimoda's Team Honda HRC Progressive CRF250R Works Edition.
PitBits FoxRaceway 2026 ProMotocross-062
That is not a stock shroud, nor a Cycra one. That's a R-Tech shroud which has a curve in the front to keep the radiator shroud out of Hymas' boot.
PitBits FoxRaceway 2026 ProMotocross-011
Shimoda and Hymas' machines feature the stock Works Edition shock bodies and adjusters, that's new.
PitBits FoxRaceway 2026 ProMotocross-010
Shimoda's machine features a set of titanium upper engine hangers.
PitBits FoxRaceway 2026 ProMotocross-035.jpg?VersionId=RxlheLq46bkN4SUEfcE
Ben was easy to spot at Fox.
PitBits FoxRaceway 2026 ProMotocross-048
Aden Keefer had a rookie debut to forget. After qualifying 16th in the combined results from session one, a clutch issue in session two kept him from setting a fast time. With the second session being much drier and faster, his first qualifier time only kept up to 38th when everything was said and done. He was off to the LCQ, where a first turn crash resulted in him rejoining the race in last place and passing over 20 riders in four laps. He missed the cut but should easily be in the show at Hangtown. Head up, Lil Keefer.
PitBits FoxRaceway 2026 ProMotocross-082
Phoenix Honda also joined the new look for Pro Motocross, leaning towards a blue rear and more HONDA branding.
PitBits FoxRaceway 2026 ProMotocross-084
Gavin Towers is team Steg Pegz.
PitBits FoxRaceway 2026 ProMotocross-053
The man, the myth, the legend...John Tomac.
PitBits FoxRaceway 2026 ProMotocross-054
Chase Sexton's rig on the weekends.
PitBits FoxRaceway 2026 ProMotocross-117.jpg?VersionId=EQkEu67hF0PvFNZSH
Look at Lux, helpful guy right here.
PitBits FoxRaceway 2026 ProMotocross-115.jpg?VersionId=v.AEbMAibFWLFqQeVL1
Austin, you've been spending too much time with Duffe, getting "personal" deals now, ha.
PitBits FoxRaceway 2026 ProMotocross-122
Rough way to start the morning...
PitBits FoxRaceway 2026 ProMotocross-094.jpg?VersionId=npYMFIRTVCaLRzieRTT.KNHVZGcL2M
That's a lot of goggles...
PitBits FoxRaceway 2026 ProMotocross-056.jpg?VersionId=0kt2R1
Levi Kitchen's Monster Energy Pro Circuit Kawasaki KX250.
PitBits FoxRaceway 2026 ProMotocross-057.jpg?VersionId=jDEqJaNGEOcqgmvX.9Abw530iLn
Steg Pegz have also returned to Kitchen's machine, who's been running them in outdoors for three or four seasons now.
PitBits FoxRaceway 2026 ProMotocross-058.jpg?VersionId=Q9T2EQaPM6tatR
Kitchen's Showa A-kit shock features a bladder extender and had a shock sock on just in case. We noticed some engine mount differences between himself and Hammaker, as Kitchen ran stock uppers but titanium front mounts.
PitBits FoxRaceway 2026 ProMotocross-059
While Seth's bike featured carved-down stock upper engine mounts, paired with stock front mounts.
PitBits FoxRaceway 2026 ProMotocross-159.jpg?VersionId=J.zXORy3WFUsPNe
Yes, Kitchen had the cable clutch at Fox Raceway.
PitBits FoxRaceway 2026 ProMotocross-061.jpg?VersionId=l9yf8sJuNYEH8
PC has moved back to using oversized CRM Karbotanks for Pro Motocross, after using stockers the past season or two.
PitBits FoxRaceway 2026 ProMotocross-124.jpg?VersionId=hHVExRGuYX
Levi was hyped after his moto one victory.
PitBits FoxRaceway 2026 ProMotocross-126.jpg?VersionId=.MjQDkYqdwuIJz4YTRDQXB aJ
We are SPEED.
PitBits FoxRaceway 2026 ProMotocross-128.jpg?VersionId=.r8.2elPvwX6pFY1qokxF.EHvjR
Last min change for Mikkel Haarup, who swapped from Canvas to FXR right before the season opener.
PitBits FoxRaceway 2026 ProMotocross-119
Daniel "Mohead" Castloo was Jason Anderson's practice mechanic this year and still is. He mentioned to us that he's still working for Jason and to expect him back sometime soon.
PitBits FoxRaceway 2026 ProMotocross-118.jpg?VersionId=st3m.Raob1Cq
Brock Bennett recently had a cancer scare, beat it, and is back racing! He's also rocking 6D's MAX goggle.
PitBits FoxRaceway 2026 ProMotocross-113.jpg?VersionId=D.B
Best dog in the pits? That's got to go to Russ.
PitBits FoxRaceway 2026 ProMotocross-111
Deegan with the cable clutch on his YZ450F.
PitBits FoxRaceway 2026 ProMotocross-107
J-Coop is sticking it out with the hydro, albeit the ARC version.
PitBits FoxRaceway 2026 ProMotocross-105
And Webb, who has been a hydro guy since his time with KTM, went back to a cable for outdoors this year. This surprised us.
PitBits FoxRaceway 2026 ProMotocross-106
Hmmm...
PitBits FoxRaceway 2026 ProMotocross-125
Nick Romano was FIRED up after his first moto.
PitBits FoxRaceway 2026 ProMotocross-078.jpg?VersionId=ifaMfr
5.11 marks one of the more unique but cool brands to jump into team title sponsorship.
PitBits FoxRaceway 2026 ProMotocross-070
For Pro Motocross, the Star team lowers and reinforces the chain roller on the subframe...we need to check on this one a bit more.
PitBits FoxRaceway 2026 ProMotocross-135
Great job Seth.
PitBits FoxRaceway 2026 ProMotocross-143
Hammaker went from not even having an overall podium in Pro Motocross to a win.
PitBits FoxRaceway 2026 ProMotocross-130.jpg?VersionId=4Y2Dv6pS0 Nss8d3VbHCr 6IrYZv
Off-road guys are fast. Dante Oliveira came out and passed more riders than anyone all weekend and finished 16th overall. 
PitBits FoxRaceway 2026 ProMotocross-129
Benny Bloss Canvas' gear was a nod to the late Kyle Busch.
PitBits FoxRaceway 2026 ProMotocross-140
Julien Beaumer made his return to racing after a huge back injury in SMX last year.
PitBits FoxRaceway 2026 ProMotocross-133.jpg?VersionId=
When your guys hits the podium but you're running behind.
PitBits FoxRaceway 2026 ProMotocross-147
You could say this man had some fun at Fox.
PitBits FoxRaceway 2026 ProMotocross-158.jpg?VersionId=fDRKHLqF1D55nac00Nguv
Welcome back, Jett.
PitBits FoxRaceway 2026 ProMotocross-086.jpg?VersionId=86H7E56OAQIKB3o
PitBits FoxRaceway 2026 ProMotocross-141
Caden Dudney now holds the record for the worst moto scores to get a second overall at a National with a 6-4. Hey, it's still a podium at 16 years old.
PitBits FoxRaceway 2026 ProMotocross-097
Proffesional.
PitBits FoxRaceway 2026 ProMotocross-150
Talking about every sketchy moment.
PitBits FoxRaceway 2026 ProMotocross-155
That's nice, Jett.
PitBits FoxRaceway 2026 ProMotocross-160.jpg?VersionId=LtrA2LgUbSkDDranMJIozKvNM51W
See you all at Hangtown!
Related:
Vital MX Pit Bits
Fox Raceway
2026 Pro Motocross Championship
2026 SMX World Championship
2026 SuperMotocross World Championship
Pit Bits 2019
4 comments

View replies to: Vital MX Pit Bits: 2026 Fox Raceway National

c50 IMG 2102 1504976896
OR Racer46
4 months ago

Does AP really  have a Prado gas cap on his bike ? 

c50 97598130 1254664699
AussieParaMX
4 months ago

Is it weird that ‘the Lawrence boys run a bigger fork cartridge in mx compared to SX but a smaller shock shaft?