Started new thread YZ Triple tree 3/29/2018 7:20 PM

I have a 04' YZ125. Does anybody know what year lower tree will fit. According to the part number (5XE-23340-L0-00) 2004 was one in its own. Thank you

This forum thread has 1 reply

Added reply in a thread Problematic 07' kx250f 3/11/2018 10:05 PM

Yes there was a washer between the basket and the inner hub then a washer with cut outs to match the crank. The little ball was in a piece that sits between the inside of the pressure plate and the nut holding the hub. I had to open the outer case to

... more »
Added reply in a thread Problematic 07' kx250f 3/9/2018 12:42 PM

Thank you "Paw Paw" How can i confirm that a "shifting dog" is broken. I am getting our of my comfort zone and almost ready to just pack it up and take it to the dealer. as I said before the inner hub spins, and the hub does not. This is normal, the ... more »

Added reply in a thread Problematic 07' kx250f 3/9/2018 10:18 AM

Here is the pictures, I spoke with another member who said to remove the basket and put the bike in "n" he said the shaft that the basket sits on should be the only thing moving which it did, he said when I put it in 1st,2nd 3rd etc that the shaft and

... more »
Added reply in a thread Problematic 07' kx250f 3/8/2018 6:56 PM

I can get some pictures tomorrow, the inner hub spins freely and the basket does not spin at all. Could I have damaged something by attempting to rotate the basket ? I am beyond frustrated with this thing as I have no idea what is going on.

Added reply in a thread Problematic 07' kx250f 3/8/2018 12:47 PM

OK Guys I got the new clutch in and installed it with the correct torque settings per the manual (checked them twice). I got it all back together and its doing the same thing. The bike will start and idle fine in "N" but when I put it in gear it dies, ... more »

Started new thread rebuild question 3/6/2018 5:35 PM

Loking at picking up another 2 stroke, the guy states the cylinder was "welded, re-sleeved and honed" Just curious if this is a common thing as I have never heard of this and I have a 99' yz that has never had anything like that done.

This forum thread has 4 replies

Added reply in a thread Problematic 07' kx250f 3/3/2018 7:32 PM

thank you for the replies, I looked at the parts diagram and did not see that special o ring so thank you. The clutch set up is all stock, I ordered a complete clutch kit today so I hope that does it. I will post back results when I get it installed, ... more »

Started new thread Problematic 07' kx250f 3/3/2018 2:12 PM

problem #1 The other day we went riding and I somehow sheared the bolt off the kick start, still rode the bike and had no issues. The following day we extracted the bolt luckily doing no damage to the shaft. Now the clutch will not work, there is tension

... more »

This forum thread has 13 replies

Added reply in a thread Mx stand suggestions 1/25/2018 7:19 PM

You have a thing about my rats nest dont you, unless I am missing a inside joke somewhere. None the less I am still finding little dingle berries from that little prick. As far as a good stand him I would think a wooden box with weed and some hard liquor.... ... more »

Added reply in a thread Mx stand suggestions 1/25/2018 6:26 PM

I have had horrible luck with hf stuff except for there air compressors... I have one that is about 10 years old and works like new. Honda11- can you keep the bike on the stand when not is use?

Started new thread Mx stand suggestions 1/25/2018 4:57 PM

Hey guys looking for a new stand, currently have a standard tusk stand but looking to get a lift type stand. I am really liking the Matrix Concepts LS1 stand but there is no reviews on it.... I am a review kinda guy any info would be good or any other ... more »

This forum thread has 13 replies

Added reply in a thread Kx250f help 1/24/2018 5:20 PM

Hey guys sorry for the delay but i did get the problem fixed. I rebuilt the carb about 3 weeks ago, figuring this is where my problem was I went and took everything off and was I surprised! I found a rats nest in the darn airbox, Cleaned it all up and ... more »

Added reply in a thread Kx250f help 1/16/2018 7:34 AM

Thank you for the replies, I had actually been researching it for a while now and heard "hot start" but never paid attention that they were different. I have been using it to start a cold bike, normally pull it with the clutch and 2 kicks she would start, ... more »

Started new thread Kx250f help 1/15/2018 10:03 PM

Hey guys new as a member but i have visited this site for a while as a guest. I have a question regarding my 07 kx250f. This bike is all stock and has been problem free. I pulled it out for the first time in about 5 months to go for a ride with some ... more »

This forum thread has 11 replies