Different year pegs fit RMZ I hear, anyone confirm this? 2023 Rmz250 fastway air evo ext

kylie
Profile picture for user kylie
Posts
14
Joined
10/1/2022
Location
CA
kylie

This is a key deciding factor if I get this RMZ. 

 

Fastway does not make a footpeg for 10-26 RMZ due to bracket they say is hard to make for. 

 

I read on Raptor page their 04-06 RM 2 stroke retrofits because of similarity. 

 

I emailed fastway they said theirs won't retrofit. Anyone make fastways air exts to fit?

 

Thanks in advance for any direction!

|
RussB
Profile picture for user RussB
Posts
1016
Joined
7/12/2014
Location
GB
RussB 11/7/2025 1:31am
11/7/2025 1:31am

I have seen people using an RMZ peg on an RM. With some minor material removal to the stopper to get the peg to sit flat.

So in theory an RM peg should work on an RMZ, but you may have to do some work to get them at the correct level

desertratlife 11/7/2025 9:32am
11/7/2025 9:32am
kylie wrote:
This is a key deciding factor if I get this RMZ.  Fastway does not make a footpeg for 10-26 RMZ due to bracket they say is hard...

This is a key deciding factor if I get this RMZ. 

 

Fastway does not make a footpeg for 10-26 RMZ due to bracket they say is hard to make for. 

 

I read on Raptor page their 04-06 RM 2 stroke retrofits because of similarity. 

 

I emailed fastway they said theirs won't retrofit. Anyone make fastways air exts to fit?

 

Thanks in advance for any direction!

Yes, they fit.  You have to grind off the back tab on the peg mount.  It's literally a five minute job.

kylie
Profile picture for user kylie
Posts
14
Joined
10/1/2022
Location
CA
kylie 11/24/2025 4:37pm
11/24/2025 4:37pm
kylie wrote:
This is a key deciding factor if I get this RMZ.  Fastway does not make a footpeg for 10-26 RMZ due to bracket they say is hard...

This is a key deciding factor if I get this RMZ. 

 

Fastway does not make a footpeg for 10-26 RMZ due to bracket they say is hard to make for. 

 

I read on Raptor page their 04-06 RM 2 stroke retrofits because of similarity. 

 

I emailed fastway they said theirs won't retrofit. Anyone make fastways air exts to fit?

 

Thanks in advance for any direction!

desertratlife wrote:

Yes, they fit.  You have to grind off the back tab on the peg mount.  It's literally a five minute job.

Thank you awesome. And this was an RM peg correct

desertratlife 11/24/2025 5:08pm
11/24/2025 5:08pm

I don't remember which part number, call Fastway and they will tell you which one you need.

The Shop

See All »
kylie
Profile picture for user kylie
Posts
14
Joined
10/1/2022
Location
CA
kylie 11/24/2025 6:45pm
11/24/2025 6:45pm
desertratlife wrote:

I don't remember which part number, call Fastway and they will tell you which one you need.

I've emailed them. They said they don't offer anything for current gen rmz.  I tried asking if I could make a retrofit work like Raptors RMZ amd they said no. 

 

desertratlife 11/24/2025 6:55pm
11/24/2025 6:55pm
desertratlife wrote:

I don't remember which part number, call Fastway and they will tell you which one you need.

kylie wrote:
I've emailed them. They said they don't offer anything for current gen rmz.  I tried asking if I could make a retrofit work like Raptors RMZ...

I've emailed them. They said they don't offer anything for current gen rmz.  I tried asking if I could make a retrofit work like Raptors RMZ amd they said no. 

 

I guess you talked to the wrong person, there was a gal that was happy to help and I have always found Fastway to be helpful in general.  Ask again?

Post a reply to: Different year pegs fit RMZ I hear, anyone confirm this? 2023 Rmz250 fastway air evo ext