Posts
4
Joined
5/19/2024
Location
Beaudesert, QLD, AU
Hi everyone I’m having trouble getting my bike to create a spark I was riding the day prior and parked it up the next day It wouldn’t kick over so I pulled the plug and found I was not getting spark so I blew out the killswitch thinking it might be an easy fix but that did not work I then put a brand new plug in and tested for spark and still nothing so we checked that the spark plug cap was getting volts through the on the multimeter and had nothing so I’m not sure where to go from here and help would be greatly appreciated 🙏
Unscrew boot off coil wire and cut a small piece off wire Re screw boot back on test for spark
Still didn’t work I’m gonna pull off the wires from the coil and clean them when I get home from work tomorrow but other than that I’m not sure can only be a stater coil or magneto after that right
Or a wire harness issue Prob stator though
Yeah that’s what im thinking was hoping it’s just a simple issue but dosent look like it thanks for the tips
Post a reply to: 2010 husqvarna tc250 4t sparking issues