Guzzi's Oz 1995 YZ250 full rebuild finally runs :)

OleTex
Posts
658
Joined
7/16/2016
Location
Central, TX, USA
4/4/2023 3:25pm Edited Date/Time 4/4/2023 3:26pm

Mr. Guzzi congratulations! You performed an extremely hard restoration through COVID and made it! I’m drinking a beer 🍺 to you. Amazing journey. 
 

She’s a runner!

2
6/18/2023 1:11am

have had some dramas getting the old girl onto the dirt. Could not get the radiators to hold water so had to get a hose kit and then of course the 35 year old Y Junction just fell apart in my hands. Luckily one came up here locally on Ebay.

Managed to finally get a set of clutch bolts and replace the one I broke. 10Nm on these things feels like WAYyyyy too much

Now she runs but its got a horrible vibration. Couldn't get one of the silencer bolts to line up>? Could be the cause. Have tried tightening all the engine mounts. I never cut back the powder coat on the engine mounting points so could be another culprit.

I am just praying the crank isnt out of true...But I cant see that happening as I got Serco to do it and they are usually brilliant.

Help

1
7/22/2023 2:46am

so i have replaced the bungs in the silencer with new OEM and also replaced an extra hanger on the exhaust. Its a pro circuit and it seems to be the source of the vibration. When you give it a strong rev its moving, i dont know if its because of the power valve maybe incorrectly adjusted or something but the pipe wants to move away from the head under high revs.

Its hard to see but these things only have the o-ring on the head and nothing else, i feel like if it had a copper washer or something to cushion the pipe a bit like the old kX has...

1

The Shop

10/5/2023 2:44pm

So I have finally got some land now and got the old girl out to feed! I think the source of my vibration is a loose headset 😀🤦‍♀️

after a few blasts she’s actually a ripper! Got heaps of smooth power and plenty of it from the pipe and reeds. Just need to get it idling properly and make a few small changes.

C0D96FF5-5D94-4DFD-877A-89B9B80D2077.jpeg?VersionId=tmkZ.UmB

oh and looked what’s arrived in the mail 😂😀😀😀

 

4

Post a reply to: Guzzi's Oz 1995 YZ250 full rebuild finally runs :)

The Latest