1973-1974 CR250M ??

dick
Profile picture for user dick
Posts
13
Joined
12/16/2009
Location
CA
dick
Edited Date/Time 4/8/2015 5:50pm
What cylinders will fit this bike
Is it just the 73 - 74 that fits or will other years
Even the MT's and MR's
Thanks for any help
Also--if anyone has one to sell
Derick
|
newmann
Profile picture for user newmann
Posts
24438
Joined
4/1/2008
Location
US
newmann 12/24/2009 2:05pm
12/24/2009 2:05pm
73-74 CR250 cylinders, that's all. Should have asked about two months ago, I sold a overflowing longbed pickup truck load of 73-74 bikes and parts for chumpchange. Would have given you a cylinder. Is it for a show bike or a racer? Should be able to find one cheap on ebay. I can get you one if you need me to.
dick
Profile picture for user dick
Posts
13
Joined
12/16/2009
Location
CA
dick 12/26/2009 10:03pm
12/26/2009 10:03pm
Well, right now the guy I am doing it for says he is going to race it for 4 or 5 laps a year
But the money I am putting into it--he may end up showing it
hahaha
He sent it to me to restore---so it will end up turning into a 100% show bike--that works 100%
hahah

I am, at this time having a hard time to find one
only 75 and 76's on ebay
flblues
Profile picture for user flblues
Posts
1
Joined
4/8/2015
Location
Milbank, SD US
flblues 4/8/2015 10:54am
4/8/2015 10:54am
newmann wrote:
73-74 CR250 cylinders, that's all. Should have asked about two months ago, I sold a overflowing longbed pickup truck load of 73-74 bikes and parts for...
73-74 CR250 cylinders, that's all. Should have asked about two months ago, I sold a overflowing longbed pickup truck load of 73-74 bikes and parts for chumpchange. Would have given you a cylinder. Is it for a show bike or a racer? Should be able to find one cheap on ebay. I can get you one if you need me to.
Are you still able to get a 73-74 cr250m jug?
newmann
Profile picture for user newmann
Posts
24438
Joined
4/1/2008
Location
US
newmann 4/8/2015 11:51am
4/8/2015 11:51am
newmann wrote:
73-74 CR250 cylinders, that's all. Should have asked about two months ago, I sold a overflowing longbed pickup truck load of 73-74 bikes and parts for...
73-74 CR250 cylinders, that's all. Should have asked about two months ago, I sold a overflowing longbed pickup truck load of 73-74 bikes and parts for chumpchange. Would have given you a cylinder. Is it for a show bike or a racer? Should be able to find one cheap on ebay. I can get you one if you need me to.
flblues wrote:
Are you still able to get a 73-74 cr250m jug?
I will probably run into the guy I sold all my stuff to back then next week at the Diamond Dons race. I can see what he has. What all do you need? Need to be perfect with no bent or broken fins? Or just a raceable one with some bores left in it?

The Shop

See All »
Shawbridge Husky 4/8/2015 5:50pm
4/8/2015 5:50pm Edited Date/Time 4/8/2015 5:55pm
I think Gwen here has one, ships from Montreal.
Send me a text on 514-817-seven 2 three 2 and I can hook you up.
I see you are in Canada so that simplifies shipping a little.
The exhaust port comes out on an angle right ?
If else fails then get the one off of Joe, not trying to butt in
or anything just want to help out.

Can you ID from these pics ?

On edit : old eBay link with couple pics I found :

Ahhh, this is an old '09 post the new guy is USA.
Anyhow this is available.

http://www.ebay.com/itm/1974-honda-cr250-mx-cylinder-/191534290832?nma=…







Post a reply to: 1973-1974 CR250M ??