Honda CR250 2005

Since im moving to work up to northen Sweden i want too see if there is any interest in my bike that i’ve been building this winter.

Been completely stripped to the frame and built up with new parts.

Engine
- New crank
- Every bearing in the engine
- Every gasket, seal
- Piston
- New clutchplates
- VHM head
- Vforce3 reeds
- Keihin airstriker carb
- Engine cases glassbeed blasted
- Clutchcase, clutch cover, waterpump, flywheel cover cerakoted
- Assembled with All new bolts from Bolt motorcycle hardware

Frame
- Every bearing, linkage, steering, swingarm new
- CMT carbonfiber fueltank
- Xtrig Rocs Pro triple clamps with PHDS mounts
- Pro Taper Fuzion handlebar, ball bearing throttle, Sunline clutchlever and purch, brembo front master cylinder (KTM)
- Pro Circuit Works pipe, R304 silincer
- Both radiators new
- AS3 silicone radiator hoses
- Onegripper seatcover
- Chainslide, guide and rollers new
- Ohlins MXF48 forks (Kawasaki) serviced with new bushings and seals. Cerakoted because coating was destroyed.
- Stock showa rear shock, new seals and bushings, cerakoted.
- New footpeg mounts and footpegs
- New shift and brakepedal
- Front and rear brake calipers cerakoted
- Brake calipers and master rebuilt with new seals
- New Excel gold rims with new spokes and nipples. Stock hubs cerakoted.
- 270mm motomaster front disc, motomaster rear disc, new brakepads front and rear.
- New front and rear brakelines
- New sprockets and chain
- All plastics new, front numberplate and fender are 2014 Cycra. Plastics mounted with all new bolts.

At this moment the bike has been used for 3hrs since finished, small normal wear visible as usual on dirtbikes.

There should be most of the things listed, probably forgot something.

Asking 6500€/6780$

Bike is located in Finland, but can be shipped worldwide when buyer pays for shipping.