Posts
6
Joined
10/5/2020
Location
Lineville, AL, USA
Edited Date/Time
3/22/2022 9:53pm
Hey guys,
I've been around this sport for the last 28 years, racing 2 strokes in the beginning, then going to 4 and now finally going back to the fun 2 again. I sold a 2017 fc450 I've had forever and bought this 2018' for next to the same I sold the 450 for.
Someone bought a Tc when they should of bought a Te, it come with a big tank, big bars, spark arrestor and other misc woods stuff. I'm a MX only rider so I took that stuff off and put the factory tank back on and sold the rest.
First I went through the suspension and had it refreshed and revalved by www.FastlapSuspension.com. Then I rode it for a few races as it was at the end of last year before tearing it down for a color change....
I've been around this sport for the last 28 years, racing 2 strokes in the beginning, then going to 4 and now finally going back to the fun 2 again. I sold a 2017 fc450 I've had forever and bought this 2018' for next to the same I sold the 450 for.
Someone bought a Tc when they should of bought a Te, it come with a big tank, big bars, spark arrestor and other misc woods stuff. I'm a MX only rider so I took that stuff off and put the factory tank back on and sold the rest.
First I went through the suspension and had it refreshed and revalved by www.FastlapSuspension.com. Then I rode it for a few races as it was at the end of last year before tearing it down for a color change....
I LOVED the way the 2021 Rockstar Bikes looked with the black side panels and the yellow rear fender. So I did some research and thought about trying to convert my bike to use the new plastic. It wasn;t going to happen as I few tabs on the frame had changed locations and it was just too big of a hassle. So I went to Decallab.eu because no one stateside will do a replica Husky decal because of all the copyright stuff. They made great set and shipped it faster from Europe then I can get things from Ohio. Got CV4 hoses, new air filter, new Acerbis plastic and some other things.
Got the https://ride-engineering.com/ steering stabilizer kit and had a Honda shock rebuilt by fastlap too. I had to modify the back of the 2019-up number plate to use it as the yellow ears actually go behind the plate from side to side. '
After reviewing all the many tech articles I went with a Pro-Circuit works pipe but kept my FMF silencer for now, its paid for. lol
I did splurge for the GUTs Racing Winged seat and tall foam. I'm 6'1 and need a taller seat.
Phoenix White grips with gold tie wire entirely for the cool factor. Kreft Moto power valve adjuster and JD jet kit.
I haven't installed the graphics yet but the season opener is next weekend so they'll be on soon...
Post a reply to: My TC250 Rockstar Edition 2-stroke build..finished.