mounting 2020 parts to cr125

huckinn252
Profile picture for user huckinn252
Posts
90
Joined
8/31/2019
Location
Yonkers, NY US
huckinn252
have a few questions regarding parts, I want to put HRC triple clamps from a newer 250/450 to my 06 cr125. Will they bolt up and work with my stock forks? Also thinking of doing a oem wheel set from a new crf.
|
seth505
Profile picture for user seth505
Posts
10170
Joined
4/1/2008
Location
SD, CA US
seth505 11/9/2021 10:12am
11/9/2021 10:12am
No, but you could use newer triple clamps with crf forks. Also the spacing for the sprocket is different on the CRF rear hub so you don't want to use a crf wheelset (in the back).
1
TheRookie
Profile picture for user TheRookie
Posts
224
Joined
9/26/2017
Location
Annapolis, MD US
TheRookie 11/9/2021 10:26am
11/9/2021 10:26am
Go to All Balls Racing before you do anything and make sure they have bearings for what you're looking to swap. You can put what frame it is and what triple clamps you have. You will need to swap the entire front end over with that. Keep in mind the offsets are different than the 125.
1
POWLEY256
Profile picture for user POWLEY256
Posts
100
Joined
3/11/2018
Location
GB
POWLEY256 11/10/2021 1:06am
11/10/2021 1:06am
The clamps will work, im running 2012 crf450 hrc clamps in my 03 cr250, you just have to use the cr250/125 bearings and shim the forks unless you run the crf forks to match the clamps.

The newer crf rear wheel from 2013 onwards wont work in the 125/250 as they changed the sprocket spacing slightly.
1

Post a reply to: mounting 2020 parts to cr125