Posts
1496
Joined
1/1/2018
Location
St. Petersburg, FL, USA
Edited Date/Time
5/14/2019 6:13am
Looking for a titanium pivot bolt that connects the swingarm to the frame & motor. Anything from the 2005-2019 aluminum frame yz 2 strokes or 2006-2009 yzf 4 strokes will work. Under the head length should be ~ 238mm-240mm if I remember correctly. The one off my steel frame is 235mm & is a few mm too short ?
Also looking for the 3 titanium linkage / knuckle bolts as well. I believe anything from 2006 & newer 4 stroke will work. 2009 & newer for sure. Can measure if need be to verify JTBS ?
Thanks for any help guys!

Thanks ether help guys!

Also looking for the 3 titanium linkage / knuckle bolts as well. I believe anything from 2006 & newer 4 stroke will work. 2009 & newer for sure. Can measure if need be to verify JTBS ?
Thanks for any help guys!

Thanks ether help guys!

The Shop
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Luxon 4-Post Bar Mounts
$189.95 - $239.95
If so what is the under head length in mm of the smaller swingarm pivot bolt? If your caliper only goes to 6” you can take the inch measurement & x it by 25.4 . The diameter was 17mm correct (16.97mm)?
Thanks ??
Post a reply to: WTB - yz yzf titanium swingarm & linkage pivot bolts