Posts
1496
Joined
1/1/2018
Location
St. Petersburg, FL, USA
Edited Date/Time
5/14/2019 6:13am
Looking for a titanium pivot bolt that connects the swingarm to the frame & motor. Anything from the 2005-2019 aluminum frame yz 2 strokes or 2006-2009 yzf 4 strokes will work. Under the head length should be ~ 238mm-240mm if I remember correctly. The one off my steel frame is 235mm & is a few mm too short ?
Also looking for the 3 titanium linkage / knuckle bolts as well. I believe anything from 2006 & newer 4 stroke will work. 2009 & newer for sure. Can measure if need be to verify JTBS ?
Thanks for any help guys!

Thanks ether help guys!

Also looking for the 3 titanium linkage / knuckle bolts as well. I believe anything from 2006 & newer 4 stroke will work. 2009 & newer for sure. Can measure if need be to verify JTBS ?
Thanks for any help guys!

Thanks ether help guys!

The Shop
Luxon 4-Post Bar Mounts
$189.95 - $239.95
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
If so what is the under head length in mm of the smaller swingarm pivot bolt? If your caliper only goes to 6” you can take the inch measurement & x it by 25.4 . The diameter was 17mm correct (16.97mm)?
Thanks ??
Post a reply to: WTB - yz yzf titanium swingarm & linkage pivot bolts