Posts
26
Joined
6/27/2016
Location
Omaha, NE, USA
Edited Date/Time
7/19/2018 4:48am
Lots of RMZ250 parts for sale.
- Cylinder head (complete and taken from low hour 2016) $500
- Camshafts OEM - $75
- Camshafts Hot Cams Stage 1 - $100
- OEM Wheelset (front and rear) - $300
- Yoshimura Carbon slip on exhaust - $75 SOLD
- gas tank (Aluminum) with fuel pump- $75
- set of radiators - $75
- Frame - $200
- Swingarm - $150
- 2013 Motor (Kickstarter gear broke clutch cover and inner clutch cover - Good rebuildable for spare - $400
- TIres (Two rows of tires in picture) - have lots of used tires that would make good practice rubber - $100 takes all of them (probably best for local pick up, would be a nightmare to ship)
- Handlebars various bends $20 each 4 LEFT
- Plastic - have tons of used plastic - $100 come get all of it
- Lots of other smaller parts, brake systems, electrical, clutch parts etc. (contact me for details)
- Ride Engineering 22mm offset billet triple clamps (black) with steering stabilizer installed (fits 16-18 but also have the steering stem for earlier model if needed) $300
I'm sure I have a lot more that is not listed specifically. if you need something, ask, I'll check and let you know.
I am going to be parting out a 2015 RMZ450 soon so if you need 450 parts, go ahead and reach out. BIke is intact and runs just fine (new motor in the bike)
I do have 2 2016 RMZ250s that I may decide to part out or sell whole. One is completely stock with .4 hours on full motor rebuild. the other is a race ready bike. can provide more details on those.
burek0527@gmail.com
- Cylinder head (complete and taken from low hour 2016) $500
- Camshafts OEM - $75
- Camshafts Hot Cams Stage 1 - $100
- OEM Wheelset (front and rear) - $300
- Yoshimura Carbon slip on exhaust - $75 SOLD
- gas tank (Aluminum) with fuel pump- $75
- set of radiators - $75
- Frame - $200
- Swingarm - $150
- 2013 Motor (Kickstarter gear broke clutch cover and inner clutch cover - Good rebuildable for spare - $400
- TIres (Two rows of tires in picture) - have lots of used tires that would make good practice rubber - $100 takes all of them (probably best for local pick up, would be a nightmare to ship)
- Handlebars various bends $20 each 4 LEFT
- Plastic - have tons of used plastic - $100 come get all of it
- Lots of other smaller parts, brake systems, electrical, clutch parts etc. (contact me for details)
- Ride Engineering 22mm offset billet triple clamps (black) with steering stabilizer installed (fits 16-18 but also have the steering stem for earlier model if needed) $300
I'm sure I have a lot more that is not listed specifically. if you need something, ask, I'll check and let you know.
I am going to be parting out a 2015 RMZ450 soon so if you need 450 parts, go ahead and reach out. BIke is intact and runs just fine (new motor in the bike)
I do have 2 2016 RMZ250s that I may decide to part out or sell whole. One is completely stock with .4 hours on full motor rebuild. the other is a race ready bike. can provide more details on those.
burek0527@gmail.com
Also have an FMF titanium pipe (has dent), Acerbis skid plate, Showa TAC forks, and tons of other stuff in addition to the original list.
The Shop
Luxon 4-Post Bar Mounts
$189.95 - $239.95
Free shipping: VITALMX
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Post a reply to: Suzuki RMZ250 Parts Lot