06 KX250 It's Done!!!!

Casl616
Profile picture for user Casl616
Posts
52
Joined
2/28/2018
Location
Rio Rancho, NM, USA
Casl616
Edited Date/Time 3/30/2018 8:04pm
My good friend is always on this site and told me to do a thread so here I am. Last Sunday the motor locked up luckily after I hit a 3rd wide dune jump and went back to look at it. Went home and tore into the bike. Skirt came off the intake side. Cleaned out any debris left behind. Motor turns smooth. With that happening I decided it was time to freshen up the bike. I didn't happen to take any pics before I tore it apart. Kinda wish I did. Oh well. It's going to be a slow build. Here's some pics so far





|
JWACK
Profile picture for user JWACK
Posts
2588
Joined
8/7/2009
Location
USA
JWACK 3/2/2018 10:34am
3/2/2018 10:34am
Sweet! The more smoker builds the better.
Casl616
Profile picture for user Casl616
Posts
52
Joined
2/28/2018
Location
Rio Rancho, NM, USA
Casl616 3/5/2018 4:06pm
3/5/2018 4:06pm


Casl616
Profile picture for user Casl616
Posts
52
Joined
2/28/2018
Location
Rio Rancho, NM, USA
Casl616 3/7/2018 4:33pm
3/7/2018 4:33pm


Casl616
Profile picture for user Casl616
Posts
52
Joined
2/28/2018
Location
Rio Rancho, NM, USA
Casl616 3/9/2018 4:16pm
3/9/2018 4:16pm
After hours of working on this swingarm I'm done with it


The Shop

See All »
Casl616
Profile picture for user Casl616
Posts
52
Joined
2/28/2018
Location
Rio Rancho, NM, USA
Casl616 3/10/2018 4:20pm
3/10/2018 4:20pm
More progress being made. Removed casting marks from triple clamps then detailed them so they looked nice and pretty. What a pain that was. Blasted them after. Tomorrow I will take them off to get powder coated along with the ignition, clutch cover and frame.

Casl616
Profile picture for user Casl616
Posts
52
Joined
2/28/2018
Location
Rio Rancho, NM, USA
Casl616 3/16/2018 6:31pm
3/16/2018 6:31pm




Casl616
Profile picture for user Casl616
Posts
52
Joined
2/28/2018
Location
Rio Rancho, NM, USA
Casl616 3/19/2018 8:07pm
3/19/2018 8:07pm


It's not dead on but it's close to kx green
Casl616
Profile picture for user Casl616
Posts
52
Joined
2/28/2018
Location
Rio Rancho, NM, USA
Casl616 3/25/2018 7:25pm
3/25/2018 7:25pm






TrailDigger 3/26/2018 3:17am
3/26/2018 3:17am
Those triples are awesome looking!
Brent_Apodaca 3/26/2018 6:58am
3/26/2018 6:58am
Tons of time and money on that thing.
Casl616
Profile picture for user Casl616
Posts
52
Joined
2/28/2018
Location
Rio Rancho, NM, USA
Casl616 3/26/2018 7:11am
3/26/2018 7:11am
TrailDigger wrote:
Those triples are awesome looking!
They look way better in sunlight. Maybe tomorrow I'll be able to roll it out and get a good picture of them.
JWACK
Profile picture for user JWACK
Posts
2588
Joined
8/7/2009
Location
USA
JWACK 3/26/2018 8:43am
3/26/2018 8:43am
I like the frame guards. So shiny! What front brake line is that ?
Casl616
Profile picture for user Casl616
Posts
52
Joined
2/28/2018
Location
Rio Rancho, NM, USA
Casl616 3/26/2018 9:01am
3/26/2018 9:01am
JWACK wrote:
I like the frame guards. So shiny! What front brake line is that ?
Thanks... It's an outlaw racing stainless brake line. The fittings are pretty nice on it.
Casl616
Profile picture for user Casl616
Posts
52
Joined
2/28/2018
Location
Rio Rancho, NM, USA
Casl616 3/30/2018 4:33pm
3/30/2018 4:33pm










BenG
Profile picture for user BenG
Posts
228
Joined
12/20/2017
Location
Denton, TX, USA
BenG 3/30/2018 4:51pm
3/30/2018 4:51pm
Fantastic job.
Casl616
Profile picture for user Casl616
Posts
52
Joined
2/28/2018
Location
Rio Rancho, NM, USA
Casl616 3/30/2018 4:55pm
3/30/2018 4:55pm
BenG wrote:
Fantastic job.
Thanks man. It's been a long couple months of working OT to fund it, playing Mr. Mom while the wife's working full time and going to school full time and working on the bike a couple hours a night. I'm glad it's done
JWACK
Profile picture for user JWACK
Posts
2588
Joined
8/7/2009
Location
USA
JWACK 3/30/2018 8:04pm
3/30/2018 8:04pm
Kick ass washers on the fork guards!

Post a reply to: 06 KX250 It's Done!!!!