Posts
3
Joined
2/6/2017
Location
San Jose, CA, USA
Hey all, I'm new on here but I figured I would share my 02' CR125 project build I'm doing. I got the bike from a friend that does motorcycle pet outs and this one was on the chopping block. Bike was missing a lot of parts including forks, shock, linkage, harness, CDI Box, etc.. so far all I've done is clean the frame, swing arm and subframe. Airbox cleaned up nice as well and I'm in the process of tearing apart the motor to rebuild it completely. I'm going for a factory Honda look on this bike 2002-2004 era when Carmichael was king. Already designed my own graphics, pretty much my take on the woody design, I'll be updating as I go on the build. If you have any factory style parts for a 2002 CR125 let me know I'm always down to buy parts.
What did you clean the aluminum and airbox with?
As for the Air Box I used some 1.7 Solution Plastic and Rubber conditioner, all their product works great.
Post a reply to: 2002 CR125 Build