Bel Ray H1R

298
Profile picture for user 298
Posts
25
Joined
1/27/2015
Location
CA
298
Edited Date/Time 2/22/2015 5:39pm
Stuff is everywhere and never used it before, How do the guys that have used it like it? Specs looks good, high flashpoint and good additives. How clean does it burn and how would it compare to Maxima K2?
|
racer369
Profile picture for user racer369
Posts
631
Joined
4/1/2008
Location
MO US
racer369 2/21/2015 3:24pm
2/21/2015 3:24pm
Hated it. yz 125 hard on pistons. went to motul 800 and had ZERO problems after that. Also don't use the severer!
. Hinson peeps told me to use valveolin 10 w30 reg oil in gear case. clutch lasted forever
Tuck812
Profile picture for user Tuck812
Posts
319
Joined
12/11/2013
Location
Fallon, NV US
Tuck812 2/21/2015 8:39pm
2/21/2015 8:39pm
I have used it for 3 years now and never had any problems with my 125's or 250 in my opinion it's the best. I run 40:1 burns clean.
Flex
Profile picture for user Flex
Posts
743
Joined
1/11/2015
Location
CA
Flex 2/21/2015 8:43pm
2/21/2015 8:43pm Edited Date/Time 2/21/2015 8:43pm
Tuck812 wrote:
I have used it for 3 years now and never had any problems with my 125's or 250 in my opinion it's the best. I run...
I have used it for 3 years now and never had any problems with my 125's or 250 in my opinion it's the best. I run 40:1 burns clean.
That's what I wanted to hear. Always easy for me to look at a product and see if it is good but what is good on paper is not always what is good in the bike in the real world. Your bike is pretty similar to mine (2013 KTM 250SX) so I will give it a try! (we are talking about H1R, correct?)
Tuck812
Profile picture for user Tuck812
Posts
319
Joined
12/11/2013
Location
Fallon, NV US
Tuck812 2/21/2015 8:54pm
2/21/2015 8:54pm
Tuck812 wrote:
I have used it for 3 years now and never had any problems with my 125's or 250 in my opinion it's the best. I run...
I have used it for 3 years now and never had any problems with my 125's or 250 in my opinion it's the best. I run 40:1 burns clean.
Flex wrote:
That's what I wanted to hear. Always easy for me to look at a product and see if it is good but what is good on...
That's what I wanted to hear. Always easy for me to look at a product and see if it is good but what is good on paper is not always what is good in the bike in the real world. Your bike is pretty similar to mine (2013 KTM 250SX) so I will give it a try! (we are talking about H1R, correct?)
Sorry yes H1R

The Shop

See All »
Flex
Profile picture for user Flex
Posts
743
Joined
1/11/2015
Location
CA
Flex 2/21/2015 9:01pm
2/21/2015 9:01pm
Tuck812 wrote:
I have used it for 3 years now and never had any problems with my 125's or 250 in my opinion it's the best. I run...
I have used it for 3 years now and never had any problems with my 125's or 250 in my opinion it's the best. I run 40:1 burns clean.
Flex wrote:
That's what I wanted to hear. Always easy for me to look at a product and see if it is good but what is good on...
That's what I wanted to hear. Always easy for me to look at a product and see if it is good but what is good on paper is not always what is good in the bike in the real world. Your bike is pretty similar to mine (2013 KTM 250SX) so I will give it a try! (we are talking about H1R, correct?)
Tuck812 wrote:
Sorry yes H1R
Do you run their EXS 4 Stroke stuff in the tranny? Or just Gear Saver.. etc.

Also does the H1R seem to mix well?
Tuck812
Profile picture for user Tuck812
Posts
319
Joined
12/11/2013
Location
Fallon, NV US
Tuck812 2/21/2015 9:06pm
2/21/2015 9:06pm
Flex wrote:
That's what I wanted to hear. Always easy for me to look at a product and see if it is good but what is good on...
That's what I wanted to hear. Always easy for me to look at a product and see if it is good but what is good on paper is not always what is good in the bike in the real world. Your bike is pretty similar to mine (2013 KTM 250SX) so I will give it a try! (we are talking about H1R, correct?)
Tuck812 wrote:
Sorry yes H1R
Flex wrote:
Do you run their EXS 4 Stroke stuff in the tranny? Or just Gear Saver.. etc.

Also does the H1R seem to mix well?
Yes mix's really well and I run gear saver 75w in an all my 2stroke tranny's and never had any problems
motosicko
Profile picture for user motosicko
Posts
142
Joined
3/16/2013
Location
Denver, CO US
motosicko 2/22/2015 4:46pm
2/22/2015 4:46pm
Ran H1R and Trick Race Fuel for many years in YZ's and CR's at 40:1, and when I did top ends, there was no carbon build-up on pistons, just a thin film on top of pistons that could be wiped clean with a rag. Bottom ends never wore beyond spec. Bel-Ray makes good stuff. Still using all Bel-Ray oils in my CRF's.
Hondas4Life3
Profile picture for user Hondas4Life3
Posts
908
Joined
7/30/2013
Location
Spring Hill , KS US
Hondas4Life3 2/22/2015 5:39pm
2/22/2015 5:39pm
I have ran H1R for years and have never had a problem with it. I had a rm65 go 80+ hours on the stock top end using it mixed 32:1 with pump gas, and it still ran when I sold it.

Post a reply to: Bel Ray H1R