Neken or X-Trig ?

ibaple
Profile picture for user ibaple
Posts
5
Joined
6/13/2014
Location
FR
ibaple
Edited Date/Time 8/20/2014 10:46pm
Hello,

I'm would like to equip my new KTM of a triple clamp but I don't know what chose between Neken and X-Trig.
Does anyone have feedback?
The what of the two do you recommend?

|
ibaple
Profile picture for user ibaple
Posts
5
Joined
6/13/2014
Location
FR
ibaple 7/11/2014 3:57am
7/11/2014 3:57am
Nobody ?
Zesiger 112
Profile picture for user Zesiger 112
Posts
2362
Joined
3/4/2013
Location
Galveston, TX, USA
Zesiger 112 7/13/2014 12:38am
7/13/2014 12:38am
X trig has an adjustable off set, not 100% sure about neken. The xtrig bar mounts use rubber in between the top and bottom to reduce vibration and hard landings.
Neken is mounts their bar mounts basically on an air shock, the bars actually move up and down and the pressure can be adjusted.


What are you looking for? Different offset, reduced vibration, or cool colored clamps?

ibaple
Profile picture for user ibaple
Posts
5
Joined
6/13/2014
Location
FR
ibaple 7/13/2014 1:57am
7/13/2014 1:57am
Ok thanks !
I will do a suspension preparation and get the X-Trig
Zesiger 112
Profile picture for user Zesiger 112
Posts
2362
Joined
3/4/2013
Location
Galveston, TX, USA
Zesiger 112 7/13/2014 9:38am
7/13/2014 9:38am Edited Date/Time 7/13/2014 9:45am
If you are not planning to change the off set of the clamps. The stock KTM clamps are very good. You can get them anodized orange, look up newmans sx150 build, he had his stock clamps anodized by tcr wheels. And it was really cheap in comparison. Then KTM sells the same x trig barmounts that can be purchased thru KTM powerparts. Idk what exactly you are planning but that is what I would do.

The Shop

See All »
Zesiger 112
Profile picture for user Zesiger 112
Posts
2362
Joined
3/4/2013
Location
Galveston, TX, USA
Zesiger 112 7/13/2014 9:46am
7/13/2014 9:46am

This is newmans clamps. Tcr charged $40 per clamp to strip and anodize and $25 to press the bearing out and back in.
1
ibaple
Profile picture for user ibaple
Posts
5
Joined
6/13/2014
Location
FR
ibaple 7/13/2014 9:54am
7/13/2014 9:54am
No, it's not for having anodized pieces for the bike looks more factory but for having a pleasurable bike like delete vibrations who's can paralized the wrists and forearms etc...

Post a reply to: Neken or X-Trig ?