Will kxf 250 '13 triple clamps fit '09 model?

2Fmx
Profile picture for user 2Fmx
Posts
62
Joined
8/21/2015
Location
SK
2Fmx
Edited Date/Time 11/6/2017 5:02am
I have an offer on the table for nearly brand new set of triple clamps by BUD Racing from Kawi KXF250 '13 model.
I am doing a project /rebuild of my 09 KXF250, and I would like to ask, if these '13 can fit my bike, or what may be the issue if I will try so.

Thanks for your help.

Pic for reference:

|
2Fmx
Profile picture for user 2Fmx
Posts
62
Joined
8/21/2015
Location
SK
2Fmx 11/3/2017 6:42am
11/3/2017 6:42am
These are actual pictures of the clamps (both) from bottom. I believe its 23 offset?


pCp 252
Profile picture for user pCp 252
Posts
678
Joined
1/1/2008
Location
Hampden, MA US
Fantasy
2752nd
pCp 252 11/3/2017 4:15pm
11/3/2017 4:15pm
The fork tube diameter on the 09-12's have a smaller OD than the current models '13+. So no, they are not a direct fit. Some people use a thin shim around the tubes to make up for gap. Everything else about the triple clamps are the same aside from the front number plate mounting tabs.
2Fmx
Profile picture for user 2Fmx
Posts
62
Joined
8/21/2015
Location
SK
2Fmx 11/6/2017 5:02am
11/6/2017 5:02am
Thanks a lot for clarification. Will see what I can do with price for this set and if I can make a good deal, I guess I'll go for it. I used to have similar setup on my older TM where I bought it with some after market triple clamps and there was no issue with these shims whatsoever.

I was just mainly concerned about the fit to the frame and steering stops, etc.

Thanks again.

Post a reply to: Will kxf 250 '13 triple clamps fit '09 model?