2003 TM EN 250 project

MigGames
Posts
76
Joined
12/27/2016
Location
GB
2/7/2021 1:54am
Hi guys thought id post this here as its not really old enough to be old school.
Found a bargain (at least in the uk) on a old ratty tm 250.
Been doing alot of research and found a few helpful threads of what parts cross over but theres a few bits it needs.
The clutch master cylinder is off a road bike it would seem so will need replacing, can i use a modern one of a ktm/husk etc?
Pictures of the heap will follow.
2
|
2/8/2021 12:25pm Edited Date/Time 2/8/2021 12:25pm
A common upgrade its to use the ktm brembo unit for lighter pull. Not the ktm magura unit.

I am using a 2011 master on my 07 tm
1
MigGames
Posts
76
Joined
12/27/2016
Location
GB
2/8/2021 12:38pm
Lovely thanks, i was thinking of using another ajp unit of a gasgas trials bike but didnt know if it would work.
Do you know in terms of clutch plates does anything cross reference or is it a tm specific item?

Post a reply to: 2003 TM EN 250 project

The Latest